ECU retards ignition without knock

Nistune topics specific to the 6802 cpu

Moderator: Matt

Post Reply
IceManPL
 

Posts: 45
Joined: Wed Apr 22, 2009 7:10 pm

ECU retards ignition without knock

Post by IceManPL »

Hi
Strange thing ...
At WOT , ECU retards ignition until 4k RPM, and then at EXACTLY 4k RPM it adds 4-5 deg.
After that timing is almost value from the map, but i think still 1 deg retarded on 3-4 gear.
I removed knock sensing from the map.

Map and log attached.
Attachments
4gear_retard_2015-05-07_1908_08.csv
(43.46 KiB) Downloaded 123 times
map.bin
(16 KiB) Downloaded 139 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: ECU retards ignition without knock

Post by Matt »

If you disconnect your knock sensor do you get the same issue?

Its like the ECU is pulling knock still (which it can do even with knock flags disabled. Normally those cells with knock sense enabled are used for pulling liming in knock limp mode, and the area used to determine if to switch to knock maps)
IceManPL
 

Posts: 45
Joined: Wed Apr 22, 2009 7:10 pm

Re: ECU retards ignition without knock

Post by IceManPL »

Heh, didn't have a chance, engine blown :roll:
Propably one of valves broke down.
Post Reply