new to nistune from stock ca18det base map to 400bhp + map

Nistune topics specific to the 6802 cpu

Moderator: Matt

Post Reply
jks1customs
 

Posts: 14
Joined: Thu Jul 31, 2014 12:24 pm

new to nistune from stock ca18det base map to 400bhp + map

Post by jks1customs »

Hi to all i am new to nistune i been running a base ca18det map , but now i got my mates 400bhp plus map ,i have loaded to my ecu but for some reason the car starts and drives and comeson boost all the way when with the base map boost , petrol and speed was limited

was this meant to happen ??

i should have to run it the following parts

720cc injectors

z32 maf

gt2871r

and some other mods for benerfit i got the tomei pon cams spec



260 duration

8.8mm lift

plus my hks gt2835r

what can i do to correct my map ??
Attachments
400BHP MAP.bin
this is the file i have loaded in to my ecu with rc 750cc injectors and z32 and no results
(16 KiB) Downloaded 222 times
Last edited by jks1customs on Sat Aug 02, 2014 12:23 pm, edited 1 time in total.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: new to nistune from stock ca18det base map to 400bhp + m

Post by Matt »

I don't really understand what is going wrong in the first sentance... after three re-reads

Do you have a tune and log file you can post here? Do you understand what is in your mates tune?
jks1customs
 

Posts: 14
Joined: Thu Jul 31, 2014 12:24 pm

Re: new to nistune from stock ca18det base map to 400bhp + m

Post by jks1customs »

i have now uploaded the file can please anyone

what would be the injectors K value and latency of the 750cc rc injectors??
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: new to nistune from stock ca18det base map to 400bhp + m

Post by Matt »

The file appears to be invalid. Perhaps only the maps were synced from the board. Make sure ROM pack is installed when syncing maps
jks1customs
 

Posts: 14
Joined: Thu Jul 31, 2014 12:24 pm

Re: new to nistune from stock ca18det base map to 400bhp + m

Post by jks1customs »

Ok thats good news for me as I was thinking that I had a damaged maf or bad injectors

Also I got the rc 750cc incjectors what would be the latency and k value on those

The map i am getting was meant to work with 720cc injectors and I got 750cc can I run it without any changes or should I manualy adjusts the k and latency then permanently burn it to my board ??

Thanks in advance Matt
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: new to nistune from stock ca18det base map to 400bhp + m

Post by Matt »

Get the file again (the full file, not one with just a few maps in it)
jks1customs
 

Posts: 14
Joined: Thu Jul 31, 2014 12:24 pm

Re: new to nistune from stock ca18det base map to 400bhp + m

Post by jks1customs »

I WILL COPY IT AGAIN, DOES IT MATTER WHEN I COPY THE MAP LIVE MY STOCK INJECTORS AND MAF OR DO I HAVE TO PUT THE Z32 AND MY 750CC INJECTORS THEN COPY IT??

WHATS THE BEST WAY TO COPY IT SAFE I HAVE UPDATED MY ROOM PACK SO ALL SHOULD BE GOOD NOW

LET ME KNOW SO I CAN DO THE BEST WAY

THANKS
jks1customs
 

Posts: 14
Joined: Thu Jul 31, 2014 12:24 pm

Re: new to nistune from stock ca18det base map to 400bhp + m

Post by jks1customs »

I GOT NISTUNE BASE MAP ON MY CA18 STOCK INJECTORS AND MAP WOULD THAT DISTURB THE NEW PLUGGED ECU THAT I AM GONNA USE TO COPY THE MAP OR IT HAS TO BE COPIED WITH THE 720CC AND Z32 MAF ??
jaredperry
 

Posts: 6
Joined: Tue Nov 04, 2014 12:50 pm

Re: new to nistune from stock ca18det base map to 400bhp + m

Post by jaredperry »

What is happening in this thread?
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: new to nistune from stock ca18det base map to 400bhp + m

Post by Matt »

What appears happened is you yelled in the thread (CAPS) and no one responded

I've got a tune (attached) which is for Z32 MAF/750CC (close enough starting point) for you to upload and try out to see if it starts

After warming up, see if you can get cruise around 14.7:1 and you should be good

Whatever the previous tune from your friends vehicle that was downloaded resulted in a dud file which could not be used to assist you
Attachments
S13_CA18DET_39F00_Z32MAF_750CC.bin
Base tune Z32/750CC
(16 KiB) Downloaded 317 times
jks1customs
 

Posts: 14
Joined: Thu Jul 31, 2014 12:24 pm

Re: new to nistune from stock ca18det base map to 400bhp + map

Post by jks1customs »

sorry for the confusion , when i wrote this msg my phone was playing up
Post Reply