s13 Ka24e-t Speedlimiter

Nistune topics specific to the 6802 cpu

Moderator: Matt

Post Reply
mikey976
 

Posts: 6
Joined: Mon Feb 21, 2011 1:04 pm

s13 Ka24e-t Speedlimiter

Post by mikey976 »

Hi all, did some research and i cant find where to remove this,
i don't see very much mention of the 89-90 s13 ka24e US motor here on the forums as i have been a lurker and reader for a while.
i tuned my car over the spring and she runs great and the earlier version of nistune i was using had the speed limiter removed.
i recently upgraded my N60 MAF to an N62 MAF and i am hitting speed limiter in 4th and 5th gear around 108-115mph
my coupe has digital hud so the numbers are climbing faster then i can monitor.

any fix for this in the address file? location i can manually edit in hex editor possibly

thanks to all in advance
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: s13 Ka24e-t Speedlimiter

Post by Matt »

I'll have a look for it in the next week
mikey976
 

Posts: 6
Joined: Mon Feb 21, 2011 1:04 pm

Re: s13 Ka24e-t Speedlimiter

Post by mikey976 »

thanks
mikey976
 

Posts: 6
Joined: Mon Feb 21, 2011 1:04 pm

Re: s13 Ka24e-t Speedlimiter

Post by mikey976 »

any update on this?
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: s13 Ka24e-t Speedlimiter

Post by Matt »

Please put the attached file in your Nistune address file folder. Found a 190km/h speed limiter which may be the one you are experiencing
Attachments
S13_KA24E_256_E.adr
updated address file
(1.34 KiB) Downloaded 142 times
mikey976
 

Posts: 6
Joined: Mon Feb 21, 2011 1:04 pm

Re: s13 Ka24e-t Speedlimiter

Post by mikey976 »

awesome thanks man, i'll report back
mikey976
 

Posts: 6
Joined: Mon Feb 21, 2011 1:04 pm

Re: s13 Ka24e-t Speedlimiter

Post by mikey976 »

no luck still still get limiter, tried under WOT and slowly creeping up to 118mph. im completely lost here. question i used to run an ostrich and socketed s13 ecu with tunerpro and a stock bin. with no limiter before being boosted. does your address files use the same limiter location as say the one i attached?

i got this one from hybridka several years ago
Attachments
S13eADR(3).adr
ka24e-s13_US
(1.92 KiB) Downloaded 135 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: s13 Ka24e-t Speedlimiter

Post by Matt »

The newer address address files previously attached the same lines for speed limiters 2,3 and rev limiter 2. However I commented out speed limiter 1 and rev limiter 1 since they didnt appear valid

I've put these back into this one (attached) if you want to try that out
Attachments
S13_KA24E_256_E.adr
File with same limiters as original Gabe version
(1.34 KiB) Downloaded 121 times
mikey976
 

Posts: 6
Joined: Mon Feb 21, 2011 1:04 pm

Re: s13 Ka24e-t Speedlimiter

Post by mikey976 »

thanks for the update, car is down for upgrades till end of april, i'll report back once i can try it out
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: s13 Ka24e-t Speedlimiter

Post by Matt »

okay. these changes are in 0.10.14 version
Post Reply