Been gone for a while, need assitance...please!

Nistune topics specific to the 6802 cpu

Moderator: Matt

Post Reply
DALAZ_68
 

Posts: 8
Joined: Tue Feb 10, 2009 4:57 pm
Location: Los Angeles, CA

Been gone for a while, need assitance...please!

Post by DALAZ_68 »

Hi guys

I've been gone for a while and my cars been in pieces a bit longer...


my question is simple, im pretty sure my software has been way over due for an update...but i go to the http://www.nistune.com/support-downloads.php and for the life of me i dont know what or which to download...help :lol:

secondly, i have a friend who has a Nistune board (for KA-T) and she was wondering if i can use my (type-1) software to help tune her board?...i dunno hence why i ask, last thing i need is me getting locked out... :?

any all help is appreciated...my car is finally coming back together and i cant wait to tune it...ill post vid and everything else i can here...

BTW, this is my current engine build: CA18DET
KA throttle body
Z32 Maf
Denso 560cc injectors
Nismo FPR
Jun Light weight FW
Spec Stage 2 Clutch
Single piece Steel DS
S15 T28
ACL crank bearings
ACL Rod bearings
NEW rings
Cometic HG
ARP head bolts
ARP rod bolts
ARP FW bolts
Greddy Timing Belt
OEM tensioner bulley
OEM spring clip
OEM Idler pulley
NIStune (type-1) board -ECU
KAAZ 2way
complete 3'' exhaust
HKS EVCS
HKS Recirculated BOV
block and head cleaned/decked...
all internals getting a much needed cleaning...
Walboro Fuel pump

also note (if at all matters) :
intake manifold ported to match TB
slight exhaust port
complete deletion of the secondary throttle butterflies (complete system is being removed and holes welded shut)since there already not in use.
New Water pump
New Thermostat
New OEM oil Pump
new seals...EVERYWHERE...lol
New Gaskets...EVERYWHERE...lol
New Bolts...EVERYWHERE...lol
current Gauges:oil temp,oil press, fuel press, water temp, Wide band o2.
new engine and tranny mounts
DALAZ_68
 

Posts: 8
Joined: Tue Feb 10, 2009 4:57 pm
Location: Los Angeles, CA

Re: Been gone for a while, need assitance...please!

Post by DALAZ_68 »

help anyone? :?: :shock:
TM_S13
 

Posts: 246
Joined: Mon Dec 29, 2008 11:29 pm

Re: Been gone for a while, need assitance...please!

Post by TM_S13 »

That's simple.
Just download and install, first the Nistune Rom Pack 2.2 then install the Nistune Version 0.9.14.22, wich is the latest.
If you have any previous Rom Pack installed, uninstall it first!

As for your friends car... that's more indicated to Matt to answer but if the car is an S13 KA24DE+T it will use a type1 board, so perhaps you'll be able to use your license...
If it's a type 2 board, I think you won't be able to... not sure though, so try and talk to Matt about it
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Been gone for a while, need assitance...please!

Post by Matt »

Yeah prob best to email me

Use the 0.9.14.21 version for Type 1 since there is a problem in the .22 version with these boards

I've got a bunch of updates which need testing before releasing the next version
TM_S13
 

Posts: 246
Joined: Mon Dec 29, 2008 11:29 pm

Re: Been gone for a while, need assitance...please!

Post by TM_S13 »

Matt wrote: Use the 0.9.14.21 version for Type 1 since there is a problem in the .22 version with these boards
Is there ? hum... what problem is it? I haven't found any issues other than those I emailed you about when you released, about the highlighting not working when with consult connected and doing the compare between diferent maps.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Been gone for a while, need assitance...please!

Post by Matt »

I found that there were connectivity issues (particularly reconnect would freeze)
DALAZ_68
 

Posts: 8
Joined: Tue Feb 10, 2009 4:57 pm
Location: Los Angeles, CA

Re: Been gone for a while, need assitance...please!

Post by DALAZ_68 »

Matt wrote:Yeah prob best to email me

Use the 0.9.14.21 version for Type 1 since there is a problem in the .22 version with these boards

I've got a bunch of updates which need testing before releasing the next version
sorry Matt, i panic and posted... :oops: i think last time i posted was over a yr ago when my car died... :cry:

my apologies sir...and thank you...
Post Reply