MAF voltage in log playback issue

Nistune topics specific to the 6802 cpu

Moderator: Matt

brett_32i
 

Posts: 73
Joined: Fri Apr 11, 2008 3:45 pm
Location: mornington peninsula victoria

Re: MAF voltage in log playback issue

Post by brett_32i »

sorry to bring this up again, just had a chance to record a couple of runs.
now this one i saved as a "good run" and when i glanced at the boost gauge it was around 18psi.
i would have thought that the maf would have to be reading 7 volts, maxed out. it is just a vl maf in a 3" pipe.
Attachments
friday good run 01_2013-03-29_1028_54.csv
(86.66 KiB) Downloaded 92 times
nistune 03.JPG
(281.96 KiB) Downloaded 1179 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: MAF voltage in log playback issue

Post by Matt »

If its a VL MAF then it should add the offset voltage automatically. Right click on VQ map and see if offset has been ticked/unticked

If the VL MAF VQ map was modified at all then the offset is not used
Post Reply