Nistune type 1 compatible with the engine CA18ET?

Nistune topics specific to the 6802 cpu

Moderator: Matt

Post Reply
seb.racing
 

Posts: 18
Joined: Wed Apr 30, 2008 5:20 am
Location: france

Nistune type 1 compatible with the engine CA18ET?

Post by seb.racing »

hello everyone,

I raise the subject, the engine CA18ET

engine nissan silvia S12 and bluebird U11T

turbo (T2) 8-valve and injection

documentation in the description

there was this

NIStune Type 1 Boards

CR31 Skyline (RB30E)
VL Commodore (RB30E)
VL Turbo Commodore (RB30ET)
Z31 300ZX (VG30E, VG30ET) 1984-1985, 1986, 1987-1989
A31 Cefiro (RB20DET)
J30 Maxima (VG30E)
S12 Gazelle (CA18)
S13 Silvia (CA18)
S13 Stanza (KA24E)
N12 Pulsar Exa (E15ET)
N13 Pulsar (CA18DE)

thank



PS: I'm new, there is a topic for presentation membres? :D
Top
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:
Contact Matt

Post by Matt »

yes can do CA18ET now

I have part number 23710-D4600 (MT)

What part number do you have?
Top
seb.racing
 

Posts: 18
Joined: Wed Apr 30, 2008 5:20 am
Location: france

Post by seb.racing »

ok, it's cool :D

I'm going to see the numbers, and I am writing



From the description nistune type1? we obtain the function on the

Diagnostic Consult for CA18ET, if I understand correctly?



sorry for my English medium :roll:
Last edited by seb.racing on Mon Dec 07, 2009 6:09 am, edited 1 time in total.
http://france-bluebird.forumactif.net/

http://wantedjapcars.xooit.fr/index.php
Top
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:
Contact Matt

Post by Matt »

we report diagnostic codes and display them.

there are no 'active tests' on Type 1 boards though
Top
seb.racing
 

Posts: 18
Joined: Wed Apr 30, 2008 5:20 am
Location: france

Post by seb.racing »

ok, it's just info sensor and actuator

it is already good.



I have reference my S12 ECU is 23710-24F01
I wanted to open the lid of the ECU for a photo, but a screw is dead,
I'll look later
I have a Bluebird with CA18ET in my garage, I look to the tomorrow reference


thank :wink:
http://france-bluebird.forumactif.net/

http://wantedjapcars.xooit.fr/index.php
Top
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:
Contact Matt

Post by Matt »

not sure on the S12 one. 21F13, 33F01 and 30F10 is what I have here

i would need you to remove the ROM chip, read out the image using an EPROM programmer and send the BIN file through
Top
seb.racing
 

Posts: 18
Joined: Wed Apr 30, 2008 5:20 am
Location: france

Post by seb.racing »

Matt wrote:not sure on the S12 one. 21F13, 33F01 and 30F10 is what I have here
the 23710-33F01 and 33F02 are version european no-catalyst
Matt wrote: i would need you to remove the ROM chip, read out the image using an EPROM programmer and send the BIN file through
you talk using this equipment?

Image

Matt wrote:yes can do CA18ET now

I have part number 23710-D4600 (MT)

What part number do you have?
I find the model number 23710-D4600 is for ECU Bluebird T12 & T72 version european no-catalyst

I'll disassemble the ECU of my bluebird U11 for verification :wink:
http://france-bluebird.forumactif.net/

http://wantedjapcars.xooit.fr/index.php
Top
streetbike
 

Posts: 69
Joined: Sat Jan 19, 2008 11:44 pm
Location: toulouse FRANCE

Re: Nistune type 1 compatible with the engine CA18ET?

Post by streetbike »

Is there some news for the s12 CA18ET ?
type 1 board possible or not ?
Top
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:
Contact Matt

Re: Nistune type 1 compatible with the engine CA18ET?

Post by Matt »

I dont have a rom image and nothing has been done with this one yet
Top
streetbike
 

Posts: 69
Joined: Sat Jan 19, 2008 11:44 pm
Location: toulouse FRANCE

Re: Nistune type 1 compatible with the engine CA18ET?

Post by streetbike »

I can upload the original .bin but nothing more ...
Top
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:
Contact Matt

Re: Nistune type 1 compatible with the engine CA18ET?

Post by Matt »

Email it through and I can have a look
Top
seb.racing
 

Posts: 18
Joined: Wed Apr 30, 2008 5:20 am
Location: france

Re: Nistune type 1 compatible with the engine CA18ET?

Post by seb.racing »

hello
sorry for the delay

Pictures of ECU de CA18ET Silvia S12 1988 years

http://img691.imageshack.us/img691/6342/img0098mvw.jpg

http://img715.imageshack.us/img715/4851/img0097y.jpg

http://img191.imageshack.us/img191/2425/img0099al.jpg

http://img820.imageshack.us/img820/5699/img0100z.jpg

http://img691.imageshack.us/img691/4261/img0101xx.jpg



I must look after the pictures of my ECU Bluebird U11
:P
Top
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:
Contact Matt

Re: Nistune type 1 compatible with the engine CA18ET?

Post by Matt »

looks same as a Z31 ECU. Just need the BIN file from the 28 pin chip on that ECU to check it here
Top
seb.racing
 

Posts: 18
Joined: Wed Apr 30, 2008 5:20 am
Location: france

Re: Nistune type 1 compatible with the engine CA18ET?

Post by seb.racing »

Matt wrote:looks same as a Z31 ECU. Just need the BIN file from the 28 pin chip on that ECU to check it here
sorry for my absence
you want the data from the chip?
I will gather additional pictures
Top
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:
Contact Matt

Re: Nistune type 1 compatible with the engine CA18ET?

Post by Matt »

Yes I need the chip removed from the ECU and read using an EPROM programmer so you can email me the BIN file
Top
Post Reply

Return to “Type 1”