scalers

Discuss possible software enhancements/changes here.

Moderator: Matt

Post Reply
bachig24u
 

Posts: 677
Joined: Mon Jun 01, 2009 11:46 pm
Location: Campbelltown, NSW
Contact:

scalers

Post by bachig24u »

Hi Matt,
in an effort to reduce scrolling about.

The Map scalers don't really need to take up a section in the left pane.

A right click function on the actual map scale could just as easily be used to change the values directly.

Maybe to assist in visually checking the scales gradient,
a graph could be an option in the menu when a 'right click' on the map is performed.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: scalers

Post by Matt »

You can change the scaler values currently on fuel/timing by moving the cursor to the required RPM/TP scaler cell and then +/- the value to adjust the scaler

(Clicking directly on the scaler will highlight the entire row/column so cursor movement is necessary)

Map scalers from the menu bar are useful to view these in 2D form for smoothing purposes. Also right click and you get the 'copy to partner' option which makes Fuel and Ignition RPM/load scales the same
Post Reply