Page 1 of 1

NT shows feature pack gauges on non fp board

Posted: Tue Aug 29, 2017 7:45 pm
by Torque
When I open the consult gauges panel I'm confronted with all the gauges pertaining to the feature pack.
Same goes for the log viewer...

I don't have the feature pack installed,

Z32 ECU/WIN XP/NT 1.2.76

I have not tested this with another laptop/installation yet

Re: NT shows feature pack gauges on non fp board

Posted: Wed Aug 30, 2017 10:32 am
by Matt
Which ones are showing? Screenshot?

Re: NT shows feature pack gauges on non fp board

Posted: Wed Aug 30, 2017 11:17 pm
by Torque
I'll do a screenshot later tonight, also will check with another laptop/installation

Re: NT shows feature pack gauges on non fp board

Posted: Thu Aug 31, 2017 7:07 am
by Torque
Tested it with another laptop, same NT version ... issue persists
To my knowledge there is no FP for the Z32 ECU, is it a bug?

Re: NT shows feature pack gauges on non fp board

Posted: Thu Aug 31, 2017 4:05 pm
by Matt
Thanks. There is FP for Z32 ECU. Its pulling in some gauges regardless of FP version like 'Flex timing offset' it appears

Re: NT shows feature pack gauges on non fp board

Posted: Thu Aug 31, 2017 8:15 pm
by Torque
I thought there haven been issues with the Z32 ECU and the FP, at least last time I checked.
Has this been resolved?

But back to the issue .. it's a bug then?

Have you seen my other post ...? :)
viewtopic.php?f=8&t=3514

Re: NT shows feature pack gauges on non fp board

Posted: Fri Sep 01, 2017 5:56 pm
by Matt
Yes it appears so. Will check it out

FP issue I found was not looking at any map when attempting to switch to knock maps. It was a problem with the patcher which I've fixed. Will be released in the next ROM pack update

Re: NT shows feature pack gauges on non fp board

Posted: Wed Sep 27, 2017 6:44 pm
by Matt