Able to view/trace only one map at a time

Discuss software bugs and related problems here.

Moderator: Matt

tahonen
Posts: 10
Joined: Wed May 02, 2012 6:20 am
Location: Seinajoki, Finland
Contact:

Able to view/trace only one map at a time

Postby tahonen » Fri Apr 28, 2017 3:52 pm

I tried to search and google, but I didn't manage to get any hits, maybe with poor search string or just not discussed.

Yesterday, (I remember getting the same problem before also), while doing some tuning I ended up loosing possibility to have fuel and ignition map open at the same time. If I have e.g. fuel map open and click on ignition map, to view it, the fuel map closes. This caused quite much trouble while it was not possible to trace both maps at the same time.

What could cause this? I didn't find any setting related to that either?

I did also end up having some strange issue also with opening O2 window. I had the green lambda 1 button up in the bar, but clicking it, did nothing.

Could this be just something related to OS/computer or what happened. I restarted computer and also the software several times, but the issue still existed with the maps, but I did manage to get the O2 open.

Using Lenovo laptop with i7 Broadwell with 8 Gb of ram and 128 SSD. OS is Win10 home.

I will remove NIStune today and install again and hope it solves the map problem as I need it the tomorrow.

I remember I had the same map issue with my old Dell M4300 laptop with Win7 x64 in it, but this has been few years ago and there has been new versions of NIStune after that, so maybe reinstall/upgrade has solved the problem in that case.

tahonen
Posts: 10
Joined: Wed May 02, 2012 6:20 am
Location: Seinajoki, Finland
Contact:

Re: Able to view/trace only one map at a time

Postby tahonen » Sat Apr 29, 2017 4:35 am

I reinstalled NIStune and now I am able to open again ignition and fuel maps the same time.

Any ideas for this to happen?

Matt
Site Admin
Posts: 7980
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Able to view/trace only one map at a time

Postby Matt » Sat Apr 29, 2017 9:31 am

Somehow the number of windows open was changed. This is a setting in File > configuration (at bottom right of this window). Default is 10 windows open, but if you change to 0-1 then it would only allow one window at a time

For the second issue, I would need a screenshot (ALT-PRINTSCN to capture, then paste into mspaint and save as a file to post here) so I can see what the problem is

tahonen
Posts: 10
Joined: Wed May 02, 2012 6:20 am
Location: Seinajoki, Finland
Contact:

Re: Able to view/trace only one map at a time

Postby tahonen » Tue May 02, 2017 3:52 pm

I remember the number of windows in the settings was 10. I changed it to maybe 12, no change. I changed it back to 10, but it was still not working.

For the O2 problem, I will take a screenshot, if I get to see the same problem again.


Return to “Software Bugs”

Who is online

Users browsing this forum: No registered users and 1 guest