There is no record in the log TP scales

Discuss software bugs and related problems here.

Moderator: Matt

Post Reply
Bgtym
 

Posts: 63
Joined: Thu Sep 26, 2013 1:32 am

There is no record in the log TP scales

Post by Bgtym »

There is no record in the log TP scales
In tuner mode, it shows the TA scales!
when I try to write the log, automatically switches to the stream. mode stream is no TP monitor scales!
and displays an error
Image
Image
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: There is no record in the log TP scales

Post by Matt »

Standard ECU without Nistune board will not have TP. Does this have Nistune board fitted?

Open up logger, and then record. Logger will always with to stream mode. You can then switch back to tuner mode

If you have no TP with Nistune board, please do a debug log file and poste here
Bgtym
 

Posts: 63
Joined: Thu Sep 26, 2013 1:32 am

Re: There is no record in the log TP scales

Post by Bgtym »

Matt wrote:Standard ECU without Nistune board will not have TP. Does this have Nistune board fitted?

Open up logger, and then record. Logger will always with to stream mode. You can then switch back to tuner mode

If you have no TP with Nistune board, please do a debug log file and poste here
I updated to version 1.2.51 nistyun.
TP record weights, no!
I use type 2 board
Attachments
nistune-0914-1901.log
(343.29 KiB) Downloaded 187 times
nistune-0914-1837.log
(698.37 KiB) Downloaded 173 times
Bgtym
 

Posts: 63
Joined: Thu Sep 26, 2013 1:32 am

Re: There is no record in the log TP scales

Post by Bgtym »

and
Attachments
nistune-0918-2100.rar
(612.23 KiB) Downloaded 146 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: There is no record in the log TP scales

Post by Matt »

nistune-0914-1837.log
nistune-0914-1901.log
Need to be connected to consult when taking logs.

Both logs here show no useful information. There is no consult connection in these log files (just appears you are playing back a consult log)
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: There is no record in the log TP scales

Post by Matt »

Your ECU:
nistune-0918-2100.log

Code: Select all

Found COM5 Prolific USB-to-Serial Comm Port
CSerialSupport:Initialise(): Connecting to COM5
16:01:35.679 Version String:00 01 05 40 00 00 00 1F 80 00 C0 00 00 00 00 30 24 31 31 55 30 46 
16:01:35.679 Consult ECU Version: 11U0F

16:01:35.869 EventMangager: CConsultQueue::CONSULT_EVENT_FIND_REGISTERS
16:01:35.869 TX:5A 26 
16:01:35.869 RX:A5 FE 
16:01:35.869 Register 26 doesn't exist
16:01:35.869 TX:5A 27 
16:01:35.879 RX:A5 FE 
16:01:35.879 Register 27 doesn't exist

Verison info: 15
16:01:35.889 RX:35 06 00 00 15 

My ECU:

Code: Select all

01:47:32.072 TX:5A 26 
01:47:32.088 RX:A5 26 
01:47:32.088 Register 26 exists
01:47:32.088 TX:5A 27 
01:47:32.104 RX:A5 27 
01:47:32.104 Register 27 exists
The difference is that your ECU is missing the TP register (26,27) from the board!

Attached is image with consult table showing 00DB/00DC TP address. Yours would have FF,FF here to be reporting this issue

Likely this was caused by uploading the consult table from a standard ECU BIN file (during import of feature pack??). You can fix the table by using the Display > Hex editor and edit the values as displayed in second attachment
Attachments
hcr32_consult_table2.png
(10.14 KiB) Downloaded 3397 times
hcr32_consult_table.png
(10.81 KiB) Downloaded 3397 times
bill
 

Posts: 4
Joined: Mon May 10, 2010 10:22 pm

Re: There is no record in the log TP scales

Post by bill »

Back in the day there was TPLoad logging with stock ecus.
https://www.youtube.com/watch?v=Zjo7RYsQMBM
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: There is no record in the log TP scales

Post by Matt »

Only in tuner mode. Inside Stream Mode the registers 26,27 are empty (from factory) so it is not available until the board is fitted
Post Reply