CA18DET Variable Intake Solenoid scale bugs

Discuss software bugs and related problems here.

Moderator: Matt

louiswun
Posts: 222
Joined: Tue Apr 07, 2009 1:11 am
Location: Hong Kong

CA18DET Variable Intake Solenoid scale bugs

Postby louiswun » Wed Feb 25, 2015 5:54 am

As title,
RPM scale on the table is not the same as map.
Load scale seems something wrong.
Attachments
Temp118.jpg
Temp118.jpg (221.42 KiB) Viewed 1405 times

Matt
Site Admin
Posts: 8046
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: CA18DET Variable Intake Solenoid scale bugs

Postby Matt » Sun Mar 01, 2015 5:51 pm


MechanisSan
Posts: 18
Joined: Wed Mar 25, 2015 7:56 pm
Location: Europe

Re: CA18DET Variable Intake Solenoid scale bugs

Postby MechanisSan » Tue Nov 13, 2018 8:36 am

It seems to be still something wrong with that. Now the X-axis is called "load" but it seems to be rpm, but with factor 2 too high.
Currently with untouched oem values the soleniod does switch already above approx 1800rpm when there is also load. But that does not make any sense. The system is designed to switch above approx 3700 rpm when under load.
I tested a bit with the values, and like I mentioned it seems to be just a wrong scale (factor 2) at the rpm's.

MechanisSan
Posts: 18
Joined: Wed Mar 25, 2015 7:56 pm
Location: Europe

Re: CA18DET Variable Intake Solenoid scale bugs

Postby MechanisSan » Fri Nov 30, 2018 4:08 am

That's how it still looks like:
Look at the selected row. In the table it's at 3200 rpm, but in the graph it's at 1651 rpm. The numbers from the graph are where it's actually switching.

butterfly_control.jpg
butterfly_control.jpg (298.32 KiB) Viewed 174 times

Matt
Site Admin
Posts: 8046
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: CA18DET Variable Intake Solenoid scale bugs

Postby Matt » Sun Dec 02, 2018 8:19 am

I'll fix that in the next update. I moved all the definitions from hardcoded to XML file, and checked through most tables but some might have got missed

MechanisSan
Posts: 18
Joined: Wed Mar 25, 2015 7:56 pm
Location: Europe

Re: CA18DET Variable Intake Solenoid scale bugs

Postby MechanisSan » Tue Dec 04, 2018 12:08 am

Ok great. I've found some other small faults where "filtered" and "raw" is confused. I'll post the details of it later.

MechanisSan
Posts: 18
Joined: Wed Mar 25, 2015 7:56 pm
Location: Europe

Re: CA18DET Variable Intake Solenoid scale bugs

Postby MechanisSan » Wed Dec 05, 2018 7:48 am

At
"Idle Timing Offset warm (Temp)"
and
"Timing Beta Advance vs Temp"
the RAW / filtered states are confused

Matt
Site Admin
Posts: 8046
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: CA18DET Variable Intake Solenoid scale bugs

Postby Matt » Wed Dec 05, 2018 9:30 am

'Filtered' isn't displaying on the grid. I'll look into that

Matt
Site Admin
Posts: 8046
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: CA18DET Variable Intake Solenoid scale bugs

Postby Matt » Wed Dec 05, 2018 10:37 am

Those two tables shouldn't have 'filters' applied

CA18DET is one of those strange ECUs which has an offset of 16 applied to some of the idle timing tables. It doesn't show in other ECUs, because they dont have offsets

Anyway it shouldn't apply filtering to these offset tables, so I've added an extra category in the XML file to deal with IDLE_TIMING_OFFSET tables like these. Fixed along with the variable intake table for next release which should hopefully be out next week

MechanisSan
Posts: 18
Joined: Wed Mar 25, 2015 7:56 pm
Location: Europe

Re: CA18DET Variable Intake Solenoid scale bugs

Postby MechanisSan » Thu Dec 06, 2018 8:27 am

Thanks Matt, appreciate the support


Return to “Software Bugs”

Who is online

Users browsing this forum: No registered users and 2 guests