Why is this ghosted (Nistune Consult Display)

Discuss software bugs and related problems here.

Moderator: Matt

Post Reply
Torque
 

Posts: 639
Joined: Wed Jun 16, 2010 10:08 am

Why is this ghosted (Nistune Consult Display)

Post by Torque »

Hi there,

Can anyone tell me why the status fields in the Consult Display are all ghosted?

I am connected to the ECU, everything works fine but these fields are all grayed out ..
It used to work .. what am I doing wrong?

Many thanks!
Attachments
ghosted.jpg
(62.58 KiB) Downloaded 1894 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Why is this ghosted (Nistune Consult Display)

Post by Matt »

Means that likely the consult flags registers are not selected. If we dont see them marked as active I ghost out the display to prevent confusion with thinking that nothing is active (TPS switch, neutral switch etc)
Torque
 

Posts: 639
Joined: Wed Jun 16, 2010 10:08 am

Re: Why is this ghosted (Nistune Consult Display)

Post by Torque »

That's strange ... I changed nothing ..
I will double check.

Thanks Matt,

Andrew
Torque
 

Posts: 639
Joined: Wed Jun 16, 2010 10:08 am

Re: Why is this ghosted (Nistune Consult Display)

Post by Torque »

Strangely enough it was the consult registers.
So it's all fine now.

Btw.

I found that the display shows VCT as well.
Is that working and could I even log that VCT is on/off?

Thanks ...
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Why is this ghosted (Nistune Consult Display)

Post by Matt »

should display if available in the ECU
Post Reply