Gets error message "Undef" in 0.9.14

Discuss software bugs and related problems here.

Moderator: Matt

Post Reply
tim_tub
 

Posts: 13
Joined: Sat May 16, 2009 7:34 pm
Location: Sweden

Gets error message "Undef" in 0.9.14

Post by tim_tub »

When I start NisTune I get a message that says "undef" and on counsult display it says the same in every colum on the right side as you can see in the picture that I link to.

I run Vista Home Basic.

http://200sx.kicks-ass.net/tim88/img4b9399741e71c.jpg
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Gets error message "Undef" in 0.9.14

Post by Matt »

did you get any errors about not being able to find the translation file?

all this text comes from that file.

check file-configuration-translation configuraiton file. should be here:

C:\Program Files\NIStune\Translation\translation_english.ini

Also that file should be in that folder inside Windows Explorer if you check with that. Let me know

I'm guessing all other message boxes and prompts show undef also?
tim_tub
 

Posts: 13
Joined: Sat May 16, 2009 7:34 pm
Location: Sweden

Re: Gets error message "Undef" in 0.9.14

Post by tim_tub »

That solved the problem.

I didn't get the error message but the thing was that I have installed NisTune in C:\Program\NIStune but in Configuration is says C:\Program Files\NIStune\.... for translation and a few other tings
(you can se it on the picture).
http://200sx.kicks-ass.net/tim88/img4b95529f0ce76.jpg

But now it works.
Thanks :)!
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Gets error message "Undef" in 0.9.14

Post by Matt »

okay i'll have to make sure the installer is putting in the correct path, since we should read that from the Windows Registry
Post Reply