log player showing incorrect afrs

Discuss software bugs and related problems here.

Moderator: Matt

Post Reply
Fordy
 

Posts: 153
Joined: Mon Aug 31, 2009 2:20 am
Location: Uk

log player showing incorrect afrs

Post by Fordy »

anyone else having this problem of the log player not showing the correct afr's
afr reading is fine in the wideband input tracer and the gauge in the car is reading the right, nistune is loging it lower than everything else

running the 9.13.3b release

heres a screenshot

Image
Fordy
 

Posts: 153
Joined: Mon Aug 31, 2009 2:20 am
Location: Uk

Post by Fordy »

also as u can see in the fuel map behind everything

with all the versions apart from 9.12b and screen resolution of 1280x800 i cannot see the bottom row for 800rpm and nothing seems to work to zoom out
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

for now roll back to the 0.9.12b version

I have not noticed that here with the fonts rolling the screen off.

Under 'Display properties'
- Appearance - Font size ... is this 'normal'
- Settings - General - DPI ... is this 96DPI or higher?

I'm working on the font scaling so it gets larger/decreases but its still mid work in progress. My last attempts had screwed up font sizes which didnt look right so I left it with just resizable windows to it was 'usable'

I'll look into that one also this week
Fordy
 

Posts: 153
Joined: Mon Aug 31, 2009 2:20 am
Location: Uk

Post by Fordy »

Matt wrote:for now roll back to the 0.9.12b version

I have not noticed that here with the fonts rolling the screen off.

Under 'Display properties'
- Appearance - Font size ... is this 'normal'
- Settings - General - DPI ... is this 96DPI or higher?

I'm working on the font scaling so it gets larger/decreases but its still mid work in progress. My last attempts had screwed up font sizes which didnt look right so I left it with just resizable windows to it was 'usable'

I'll look into that one also this week
the dpi setting is default for vista = 96dpi

when i put 9.13.3b on i also lost my downloaded bin, until i reloaded 9.12b on it came back .....

i've completely removed nistune and rom pack and reinstalled 9.12b due to the display issues...

any recommendations on the afr reading in the log player ?
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

no but i'll check it out tonight. so this is happening whilst doing the recording then? it wasnt something i picked up, but most times in the car I cant see that logger value, only on the wideband page/guages
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

logging on latest version seems to be okay (attached pic)

display issues - i've run nistune on vista and see the problems ... exactly the same. vista makes the gridcells bigger than XP (which I develop on)

looking into it now...
Attachments
wideband_log_test.JPG
log test (delayed afr window)
(145.4 KiB) Downloaded 3630 times
Fordy
 

Posts: 153
Joined: Mon Aug 31, 2009 2:20 am
Location: Uk

Post by Fordy »

i seem to of fixed my log player problem some how :lol:

all ive done is roll back from 9.13.3b to 9.12b problem was still there,
then removed the 2 files mts.dll and mtssdk.ocx and reinstalled 9.12b with innovate support again

just tested it and everything seems to be fine now :D

thanks for the support once again just the display problem now with newer versions :)
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

no problems i'll look into that more. I thought i had all those display problems resolved but I think Vista has added 1/2 pixels more per row causing these issues
SentraBri54
 

Posts: 3
Joined: Sat Mar 28, 2009 5:53 pm
Location: San Diego

Post by SentraBri54 »

hey matt,

i switched over to a newer beta version, and now my AFR on the log player is wrong. so i tried switching back to 0.9.12B however problem still exists. i even fully uninstalled Nistune and tried to start fresh but nothing. please advise. thanks.
Fordy
 

Posts: 153
Joined: Mon Aug 31, 2009 2:20 am
Location: Uk

Post by Fordy »

sentra i had the same problem again when i went to the newest beta version

remove the 2 files in nistune folder in program files
mts.dll
mtssdk.ocx

make sure noone of the above files exist anywhere else than in the nistune folder

then uninstall nistune, restart the computer and reinstall the rom pack first and then the newest beta version and it should be fixed :D well mine fixed that way :lol:
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

the 0.9.13.8 version removes those files for you now. Which version were you running sentra?
SentraBri54
 

Posts: 3
Joined: Sat Mar 28, 2009 5:53 pm
Location: San Diego

Post by SentraBri54 »

Matt wrote:the 0.9.13.8 version removes those files for you now. Which version were you running sentra?
i just installed 0.9.13.9b this morning after a fresh install of windows xp into my laptop. so first installed the rom pack, and then the nistune. same problem. previously i tried to do what fordy said, and even reverted back to the version that worked for me previously, and no luck there.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

Nistune debug log file needed for this problem so I can investigate further. Currently I cannot repeat here and have no logs to determine the cause to pursue further
SentraBri54
 

Posts: 3
Joined: Sat Mar 28, 2009 5:53 pm
Location: San Diego

Post by SentraBri54 »

Matt wrote:Nistune debug log file needed for this problem so I can investigate further. Currently I cannot repeat here and have no logs to determine the cause to pursue further
hey matt,

i just e-mailed you a log file. thanks..
Post Reply