NIStune on Micra K11 Facelift

Discuss hardware enhancements, suggestions, and wishes here.

Moderator: Matt

Post Reply
baguete
 

Posts: 14
Joined: Sun Jun 14, 2009 5:32 am
Location: Lisbon - Portugal
Contact:

NIStune on Micra K11 Facelift

Post by baguete »

Hi, Matt manage to make NIStune Type4 board compatible with Micra K11 Facelift (98-2000), so one more vehicle to the list.
Already installed it and works like a charm, good work Matt, thank you very much. :wink:
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

also managed to get Q45 VH45 working with Type 2 this weekend also :D been having problems with the moates and this ECU. unplug the USB cable and it corrupts so removed

Possibly also got the Type 3 Q45 working also but need an ecu to test this one out on
baguete
 

Posts: 14
Joined: Sun Jun 14, 2009 5:32 am
Location: Lisbon - Portugal
Contact:

Post by baguete »

Matt, you're the man... :P When you have Type5 board ready, tell me something.


PS: Another thing, im having issues with the fuel cut (i think its the fuel cut). When engine gets to 7250rpm, it cuts, but only in 3rd,
4th and 5th gears, on 1st an 2nd gears it continues to accelerate and goes to 8.000rpm... I will try to do a log for you to analyse it.

Already raised the TP Load Limit and TP Max values but still have the same problem. What do you think about
this? Could be some kind of limitation of the cars "hardware"? Maybe MAF maxed out at that engine speed?

Uploaded some pics of the final values of logs and the dyno run i did 2 weeks ago.

Regards
Attachments
teste_potencia2-2.jpg
Dyno Run
(61.25 KiB) Downloaded 4984 times
log1.jpg
Second Log
(186.67 KiB) Downloaded 4984 times
log.jpg
First Log
(188.43 KiB) Downloaded 4984 times
sky Z
 

Posts: 22
Joined: Wed Dec 21, 2011 4:37 pm
Location: Portugal

Re: NIStune on Micra K11 Facelift

Post by sky Z »

Glad to see you here baguete, the unique nistuned K11 in portugal :mrgreen:

I hope he can work together in our nissans :)






Lúcio S
Post Reply