DLP A/D converter

Anything related to the DLP Devices IO-8 A/D converter

Moderator: Matt

Post Reply
maglito
 

Posts: 67
Joined: Sat Apr 12, 2008 3:52 pm

DLP A/D converter

Post by maglito »

When connecting a 0-5 volt output from a WB to the A/D converter, does the ground from the WB need to be connected to the ground pin on the A/D converter so that they have the same reference?

Thanks
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

Yes it does

All inputs to the A/D converter need to have their ground connected to the converter ground as a reference point
pcproa
 

Posts: 4
Joined: Wed Mar 19, 2008 5:41 am

Post by pcproa »

If your wideband unit is chassis grounded in your car, then you should be able to run a wire from the ground pin on the DLP unit to the chassis ground on the car at any point.
Post Reply