Page 1 of 1

Lambda on Aux1 won't go above 1.00

Posted: Wed Jul 15, 2015 2:00 pm
by djstatic
Hey Matt,

In my DLP folder I have afr1.csv with the typical UGEO scale. Input #1 on the DLP is wired to input #2 and aux1.csv contains this:

Code: Select all

AEM Lambda
0,0.68
160,0.7
310,0.72
470,0.74
620,0.76
780,0.79
940,0.81
1090,0.83
1250,0.85
1400,0.87
1560,0.89
1720,0.91
1870,0.93
2030,0.96
2180,0.98
2340,1
2500,1.02
2650,1.04
2810,1.06
2960,1.08
3120,1.1
3280,1.13
3430,1.15
3590,1.17
3740,1.19
3900,1.21
4060,1.23
4210,1.25
4370,1.27
4520,1.3
4680,1.32
4840,1.34
4990,1.36
For some reason in the log Aux1 won't got over 1. It's like there is a ceiling

Log output (note Lambda Vs Aux1):

Code: Select all

Lambda LHS	AFR	Aux1
0.96	14.16	0.97
0.95	14.08	0.96
0.97	14.35	0.95
0.95	14.06	0.98
0.98	14.43	0.98
0.96	14.16	0.95
0.96	14.12	0.96
0.98	14.49	0.96
0.98	14.51	1
0.99	14.62	1
1.05	15.48	1
1.04	15.34	1
1.02	15.02	1
1.03	15.18	1
1.02	15.14	1
0.98	14.43	0.99
0.98	14.54	0.98
0.99	14.58	0.99
0.95	13.98	0.93
Any idea why it's behaving like this?

Re: Lambda on Aux1 won't go above 1.00

Posted: Thu Jul 16, 2015 7:16 pm
by Matt
Seems to be a bug. Will investigate

Re: Lambda on Aux1 won't go above 1.00

Posted: Thu Jul 16, 2015 7:16 pm
by Matt

Re: Lambda on Aux1 won't go above 1.00

Posted: Thu Jul 16, 2015 10:43 pm
by djstatic
Thanks matt, I think it might affect all Aux inputs.

My boost gauge only logged 13psi and I was hitting 20 odd

Re: Lambda on Aux1 won't go above 1.00

Posted: Thu Jul 30, 2015 1:10 am
by Matt
Resolved. Problem with scaling setting max to 1

Tested -10 to 30 psi boost here:
viewtopic.php?f=6&t=3171&p=23686#p23686

Re: Lambda on Aux1 won't go above 1.00

Posted: Thu Jul 30, 2015 9:14 am
by djstatic
Sorry, but it's not resolved. you just haven't recreated it.

I will upload some files tonight.

Re: Lambda on Aux1 won't go above 1.00

Posted: Thu Jul 30, 2015 10:55 pm
by djstatic
Matt, Please review the following.

Image

For some reason the Log Recorder would not record a result higher than a 1 (red line - aux1=AEM Lambda) even though it should, as stated above.

ECU:
DJStatic.bin
RB20 ECU in RB25 (FP)
(32 KiB) Downloaded 173 times
DLP-IO8:
DLPADConverter.zip
My DLP-IO8 files
(1.69 KiB) Downloaded 229 times
Log:
2home_2015-07-29_1708_18.csv
Log File - Driving home from work
(2.88 MiB) Downloaded 150 times
In the other thread I'll whinge about the scaling :)

Re: Lambda on Aux1 won't go above 1.00

Posted: Sat Aug 01, 2015 1:00 am
by Matt
The bug for reporting lambda above 1V has been fixed in the log _recording_

The log you have posted shows Aux1 is no higher than 1.0. This has now been fixed because the wideband simply was not displaying anything leaner than 1.0 lambda due to a rounding error

Now the log you recorded above is datestamped 29th July ... so was recorded with the older version. It shows no values greater than 1.0 lambda for Aux1 entry

You will find if you record a log file with the latest version (released 30th July) that it will now record over 1.0 lambda

The combo display view with the scaling markings on the right is also a rounding issue. I've fixed this for next release
http://www.nistune.com/mantis/view.php?id=140

Please try a new log recording with new version in meantime

Re: Lambda on Aux1 won't go above 1.00

Posted: Sat Aug 01, 2015 12:09 pm
by djstatic
No worries, I think there was a misunderstanding.

I thought you were trying to say there's no problem.

I'll check the new version out. Thanks.

Re: Lambda on Aux1 won't go above 1.00

Posted: Sat Aug 01, 2015 12:52 pm
by Matt
Problem report states:
Resolved @5400
Removed (int) type cast breaking deicmal values (which meant 1 maximum for lambda)
Fixed 1.2.45

So yes a fix was made for the logging. I've fix up decimal points for the scaling but need to test all inputs

Re: Lambda on Aux1 won't go above 1.00

Posted: Sun Aug 02, 2015 9:53 pm
by djstatic
New version overwrote my DLP csv files.

Luckily they are backed up here. I'll run a log tomorrow.

Re: Lambda on Aux1 won't go above 1.00

Posted: Mon Aug 03, 2015 10:28 pm
by djstatic
I won't post today's log because of my MAF issue and the carriage return issue you found in the other thread.

Re: Lambda on Aux1 won't go above 1.00

Posted: Tue Aug 04, 2015 7:41 pm
by Matt
I made the installer check date stamps on wideband files before overwriting in next version (it did it to me too!)

Re: Lambda on Aux1 won't go above 1.00

Posted: Wed Aug 05, 2015 11:46 pm
by djstatic
Works real good now. Thanks Matt!