EGT sensr what to use?

Anything related to the DLP Devices IO-8 A/D converter

Moderator: Matt

Bgtym
 

Posts: 63
Joined: Thu Sep 26, 2013 1:32 am

EGT sensr what to use?

Post by Bgtym »

how to write egt log?
thermocouple type K has a range of 0-54 millivolt = 0-1370 degrees Celsius.
If you connect directly DLP \ BP?
or without the signal amplifier will not work? wrong

http://temperatures.ru/pdf/Type%28K%29.pdf
skylinegtrhr
 

Posts: 301
Joined: Sat Jun 21, 2008 1:50 am
Location: Croatia
Contact:

Re: EGT sensr what to use?

Post by skylinegtrhr »

Bgtym
 

Posts: 63
Joined: Thu Sep 26, 2013 1:32 am

Re: EGT sensr what to use?

Post by Bgtym »

skylinegtrhr wrote:check this topic:

viewtopic.php?f=12&t=1279&hilit=Dlp+logging
non-working link EGT))
I found another amplifier.
http://www.ebay.com/itm/Temperature-Sig ... 1393972432
skylinegtrhr
 

Posts: 301
Joined: Sat Jun 21, 2008 1:50 am
Location: Croatia
Contact:

Re: EGT sensr what to use?

Post by skylinegtrhr »

just look for AD595 chip but it is hard to find complete modul with it :(, I also did look at this you find but didn't try it please post yours experience when you try it.

and BTW if you also looking for IAT logging this is great and cheap sensor
http://www.banggood.com/Wholesale-DS18B ... 53674.html
Bgtym
 

Posts: 63
Joined: Thu Sep 26, 2013 1:32 am

Re: EGT sensr what to use?

Post by Bgtym »

I looked AD595, this chip amplification factor is high,
enhances 247 times that the output gives 0-15volt. 0-1270 degrees Celsius.
I will accomplish your goal on the results!

air temperature sensor I use 39340 37100 from Hyundai, this sensor Bosch!
Image
Image

pullup resistor 1K ohm

formula for calculating
Vect = 5000 * Rect / (Rect + 2680) ; where 2680 ohm is OEM ECU resistance between ECT input and +5V.
skylinegtrhr
 

Posts: 301
Joined: Sat Jun 21, 2008 1:50 am
Location: Croatia
Contact:

Re: EGT sensr what to use?

Post by skylinegtrhr »

this Facet EPS 1.994.019 is looking very simple to mount on pipes, nice find are you already using it for longer period?
I find it for 13€ do you have any source with good price?
Bgtym
 

Posts: 63
Joined: Thu Sep 26, 2013 1:32 am

Re: EGT sensr what to use?

Post by Bgtym »

skylinegtrhr wrote:this Facet EPS 1.994.019 is looking very simple to mount on pipes, nice find are you already using it for longer period?
I find it for 13€ do you have any source with good price?
in Russia it costs 3.5 dollars))

http://www.ebay.com/itm/SONATA-99-05-TR ... ab&vxp=mtr
skylinegtrhr
 

Posts: 301
Joined: Sat Jun 21, 2008 1:50 am
Location: Croatia
Contact:

Re: EGT sensr what to use?

Post by skylinegtrhr »

If Facet is good I'll rather use it as it have metal thread

btw you can look at schematic on page 142

http://www.innovatemotorsports.com/supp ... Manual.pdf
Bgtym
 

Posts: 63
Joined: Thu Sep 26, 2013 1:32 am

Re: EGT sensr what to use?

Post by Bgtym »

skylinegtrhr wrote:If Facet is good I'll rather use it as it have metal thread

btw you can look at schematic on page 142

http://www.innovatemotorsports.com/supp ... Manual.pdf

excellent manual, the diagram is worth a voltage divider chip after AD595
I thought to do the same,
but I find it easier to buy a ready-made board
skylinegtrhr
 

Posts: 301
Joined: Sat Jun 21, 2008 1:50 am
Location: Croatia
Contact:

Re: EGT sensr what to use?

Post by skylinegtrhr »

Hi few more questions :)
So I presume this is discussion about sensors?

http://turbobazar.ru/showpost.php?s=db6 ... tcount=413

so we can use this lookout table for all Bosch NTC N12 sensors? Fluid and air ?

Image

http://www.bosch-motorsport.de/en/de/pr ... 199317.php

what is source of this table?
Bgtym
 

Posts: 63
Joined: Thu Sep 26, 2013 1:32 am

Re: EGT sensr what to use?

Post by Bgtym »

Bosch 0 280 130 039 analog 39340 37100 Hyundai.
table above that specifically for the Bosch 039
Accordingly, this table is applicable for the sensor 39340 37100 Hyundai
This table is used to control units Bosch!
skylinegtrhr
 

Posts: 301
Joined: Sat Jun 21, 2008 1:50 am
Location: Croatia
Contact:

Re: EGT sensr what to use?

Post by skylinegtrhr »

thx I already order sensor so I'll try this ... I also order very similar sensor for oil temp
Bgtym
 

Posts: 63
Joined: Thu Sep 26, 2013 1:32 am

Re: EGT sensr what to use?

Post by Bgtym »

skylinegtrhr wrote:thx I already order sensor so I'll try this ... I also order very similar sensor for oil temp
what temperature sensor you ordered for oil?
The sensor must be small in size,
which can be screwed into spacer plate oil filters
skylinegtrhr
 

Posts: 301
Joined: Sat Jun 21, 2008 1:50 am
Location: Croatia
Contact:

Re: EGT sensr what to use?

Post by skylinegtrhr »

febi 28381

no never put sensor on spacer it can brake,
Pete had seen some catastrophic results of that,
I always make teflon pipe and mount for this, and for SR you can buy block adapter and completely remove oem filter case and use only remote oil filter
http://www.frsport.com/Tomei-193068-N2- ... _2572.html
Bgtym
 

Posts: 63
Joined: Thu Sep 26, 2013 1:32 am

Re: EGT sensr what to use?

Post by Bgtym »

Image

thermocouple amplifier
Image

Sensor boost MPX4250
EGT K-type thermocouple
air temperature 39340 37100
the fuel/oil pressure sensor from the device DEPO or any other.
Post Reply