Page 2 of 2
Re: 5v senders
Posted: Fri Mar 06, 2015 7:08 am
by skylinegtrhr
So did you manage to test these sensors?
Re: 5v senders
Posted: Sun Mar 08, 2015 6:37 pm
by STATUS
they look like std GM sensors we use them also. lsx engines have them from factory, great for logging at a cheap price
Re: 5v senders
Posted: Sun Mar 08, 2015 10:25 pm
by skylinegtrhr
Thanks for direction , can you share a link where you get them? We in Europe don+t have "real" GM only Opel with really sh... sensors made in China or Eastern Europe ...
Re: 5v senders
Posted: Tue Aug 25, 2015 10:24 pm
by 88execvl
Been a bit busy on other projects. Car was a daily for a bit there.
I got that fuel sensor for the ebay link provided.
The G sensor i think came from here
https://store.arduino.cc/product/T000060 as i bought an arduino for my testing bench purposes.
I have had a few delays but have put the yellow wire out of my LC-1 to my DLP and that is running well.
I will over time make a working AIT pre and post cooler and that will pretty much cover my needs.
Updates on the fuel sensor next week i think.
Re: 5v senders
Posted: Mon Aug 17, 2020 9:33 pm
by 88execvl
well it wasnt a week but I got an aem 30-4401 it outputs 5v pretty well.
When I was using the DLP 5v output I got complete garbage. I am guessing it was unable to regulate the voltage.
I will test this with a stable 5v buck boost conveter one day.
I can monitor the fuel pressure now and I am thinking I will send this through an arduino to create some alarms.
The next thing is I want to log solenoid performance from my transmission. Maybe also manifold pressure/temperature with something like this
https://www.efihardware.com/download/13 ... -Datasheet
The thing is I get strange readings on all the other chanels when aux 2 is plugged in.
Currently nothing is plugged into aux 1 but it seems to be getting interference
Re: 5v senders
Posted: Tue Aug 18, 2020 8:21 pm
by Matt
You need to ground (or use a weak pull down resistor) on any unused inputs, otherwise they flap to noise, and can also affect neighbouring channels too
Another option for 5V is a LM7805 regulator (google as there are various ones around)
https://www.sparkfun.com/datasheets/Com ... LM7805.pdf