Dlp connection issue

Anything related to the DLP Devices IO-8 A/D converter

Moderator: Matt

Post Reply
skidder
 

Posts: 13
Joined: Fri Apr 27, 2012 4:41 am

Dlp connection issue

Post by skidder »

Hi all,

Just installed the new version of nistune and also installed a map sensor MPX4250gp to monior my boost through the dlp.

I have been successfully using it to log AFR ratios. However now when i connect the DLP connects for a brief second then drops out.

Im not sure if this is related to nistune? I thought it may have been an issue with the map sensor i just installed. Removed these and all the other wires from the DLP and still the same issue.

Connects for a brief second and then fails.

Anyone able to shed any light on this? This is really anouying now i can no longer log
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Dlp connection issue

Post by Matt »

Which version? I've tested both the release and 0.11 versions with DLP

Wont be a problem with your boost sensor. Not a problem with Nistune either from what it appears.

Please grab a debug log of the connection issue and post here. Make sure you have DLP converter selected and correct COM port from the drop list in File > Configuration
skidder
 

Posts: 13
Joined: Fri Apr 27, 2012 4:41 am

Re: Dlp connection issue

Post by skidder »

Hi Matt,

Thanks for the reply. This is really stressing me out now! I installed nistune on another PC to see if the issue could be resolved. No Joy :(

I took a log last night but im not sure i did it correctly....the de-bug log is huge....

here goes...File attached
skidder
 

Posts: 13
Joined: Fri Apr 27, 2012 4:41 am

Re: Dlp connection issue

Post by skidder »

with the file this time
Attachments
nistune-1018-2104.log
(1.61 MiB) Downloaded 423 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Dlp connection issue

Post by Matt »

Your log is massive since you connected to consult during the logging session (only needed to connect to the DLP device!)

Anyway after looking through your DLP device basically looks dead :(
20:04:53.631 CSerialSupport:Initialise(): Connecting to COM4
20:04:53.651 Wideband 1: EventManager: DLP_CONVERTER_PING_DEVICE
20:04:53.651 TX:27
20:04:53.651 CWidebandCommon::UpdateWidebandConnected: 0 Connection 0
20:04:53.651 UpdateAllCombinationLists()
20:04:53.651 statusbar: Wideband 1: Connected to COM4
.... No response from the device

Assuming COM4 is your correct COM port for this device?

We send it a 0x27h initialisation request to that COM port but it does not respond back with anything. The FTDI chip on the DLP is working okay but the other A/D chip appears not to be responding

You can also try the test application on the DLP website
http://www.dlpdesign.com/usb/io8.shtml

I tried this with 0.11 on the weekend and DLP is still fine with Nistune
Post Reply