Using AEM Gauges

Anything related to the DLP Devices IO-8 A/D converter

Moderator: Matt

Post Reply
djstatic
 

Posts: 175
Joined: Fri Apr 16, 2010 8:59 pm
Location: South East QLD, Gold Coast

Using AEM Gauges

Post by djstatic »

Just thought I'd share some CSV files for anyone using the same AEM gauges as me (with the DLP of course).

The most popular would probably be the UGEO AFR
Image
Petrol AFR:
afr1-AEM-PetrolAFR.csv
(389 Bytes) Downloaded 255 times
E85 AFR:
afr1-AEM-E85AFR.csv
(389 Bytes) Downloaded 239 times
Lambda:
afr1-Lambda.csv
(409 Bytes) Downloaded 242 times
Last edited by djstatic on Wed Sep 05, 2012 11:27 pm, edited 1 time in total.
djstatic
 

Posts: 175
Joined: Fri Apr 16, 2010 8:59 pm
Location: South East QLD, Gold Coast

Re: Using AEM Gauges

Post by djstatic »

I also use their 35 PSI Boost Gauge (30-4406) on AUX1
Image
The sensor that was bundled with my gauge is the 3.5 BAR/50 PSIa Brass Sensor (30-2131-50)
Image
Positive is PSI, Negative is InHg (Same as the gauge display)
aux1-AEM Boost PSI-InHg.csv
(957 Bytes) Downloaded 231 times

Positive is PSI, Negative is also PSI
aux1-AEM Boost PSI.csv
(941 Bytes) Downloaded 229 times
Positive is Bar, Negative is also Bar
aux1-AEM Boost BAR.csv
(1.13 KiB) Downloaded 321 times
**Disclaimer**
I used the info available from AEM, So use at your own risk blah blah. Your stuff may be different than mine so review the files before using etc.

[rant]Why don't these a**holes make a water/oil temp gauge in Celsius! it's only a dip switch and a face plate[/rant] :evil:
Post Reply