Problem whem try to input the work into the car (solved)

Discuss hardware problems here.

Moderator: Matt

Post Reply
bloodevil
 

Posts: 11
Joined: Thu Dec 18, 2008 11:23 pm
Location: Lisboa : Portugal

Problem whem try to input the work into the car (solved)

Post by bloodevil »

ok so this is my problem ..

I read ok.. whem i want to save my work in to the car it saves (doesnt do any erros) i shut down the pc remove the cable and whem i put the car back to work it is the same ..

It doenst save the work after i turn off the car , before i turn off the car it is ok .. but when i turn on the work is not there ..

ps: sorry my bad english hope you understand...

my car is a s14a board type4

cheers
Last edited by bloodevil on Sun Mar 15, 2009 11:32 pm, edited 1 time in total.
[img]http://img210.imageshack.us/img210/9884/s14abloodevilpe2.jpg[/img]
MichaS14a
 

Posts: 164
Joined: Sat Nov 15, 2008 12:16 pm
Location: Germany
Contact:

Post by MichaS14a »

Did you click on "Burn changes permanently" before you close NIStune? In the picture below I have marked which button it is.
Attachments
Burn.jpg
(28.7 KiB) Downloaded 4003 times
bloodevil
 

Posts: 11
Joined: Thu Dec 18, 2008 11:23 pm
Location: Lisboa : Portugal

Post by bloodevil »

MichaS14a wrote:Did you click on "Burn changes permanently" before you close NIStune? In the picture below I have marked which button it is.
i did not.. i gonna try it today .. feedback later :)

Cheers and thanks for your fast answer
[img]http://img210.imageshack.us/img210/9884/s14abloodevilpe2.jpg[/img]
bloodevil
 

Posts: 11
Joined: Thu Dec 18, 2008 11:23 pm
Location: Lisboa : Portugal

Post by bloodevil »

Man i feel a bit estupid ... but problem solved :)

Once again thks ..
[img]http://img210.imageshack.us/img210/9884/s14abloodevilpe2.jpg[/img]
MichaS14a
 

Posts: 164
Joined: Sat Nov 15, 2008 12:16 pm
Location: Germany
Contact:

Post by MichaS14a »

No problem. :D
Nissan S14a (SR20DET) :-)
Post Reply