Consult reads DET (50F00) but not DE (52F00/10) COM7:SPARE

Discuss hardware problems here.

Moderator: Matt

Post Reply
STATUS
 

Posts: 119
Joined: Thu Jun 12, 2008 10:30 pm
Location: Melbourne
Contact:

Consult reads DET (50F00) but not DE (52F00/10) COM7:SPARE

Post by STATUS »

Hey guys i can connect fine to a few DET cars i have here with 50F00 ecu's but when i try to connect to any 52F00 or 52F10 ecus i get consult not connected a com7:spare error.... any clue as to why :)
STATUS
 

Posts: 119
Joined: Thu Jun 12, 2008 10:30 pm
Location: Melbourne
Contact:

Post by STATUS »

will not read any ecu i put in this car, ie even a std untouched 52F10 or 52F00 will not connect.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

How about a 50F00 in that car, which you know works in other cars. Might be your consult connector. I've emailed you the consult connector diagram and a list of things to check
STATUS
 

Posts: 119
Joined: Thu Jun 12, 2008 10:30 pm
Location: Melbourne
Contact:

Post by STATUS »

cheers i got it sorted later that day, yeah it turned out to be a vehicle harness issue, 12v was missing from consult connector.
Post Reply