consult not connected

Discuss hardware problems here.

Moderator: Matt

Post Reply
quickgtir
 

Posts: 3
Joined: Fri May 23, 2008 6:42 am
Location: Austria / Switzerland

consult not connected

Post by quickgtir »

Hi there,


i am using the blazt-serial connecting cable, until now i was just working with nissan data scan with which it was working perfectly. Now i am trying to use the blazt cable to connect to NisTune, but always i get the message "consult not connected".
if there is no way out, invent one.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

What vehicle / engine are you trying to connect to?

Which address file are you loading?
quickgtir
 

Posts: 3
Joined: Fri May 23, 2008 6:42 am
Location: Austria / Switzerland

for RNN 14

Post by quickgtir »

Hi Matt,

using it for an RNN 14 with sr20det. Have the Adressfile of S13. have any idea?

thanx
Jakob
if there is no way out, invent one.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

So NissanDataScan connects okay with the board installed but NIStune doesnt connect at all?

Can you please send a debug log through to me (see sticky in software thread)
quickgtir
 

Posts: 3
Joined: Fri May 23, 2008 6:42 am
Location: Austria / Switzerland

Post by quickgtir »

i am using a USB to Serial converter no, and it is working.

thanx matt
if there is no way out, invent one.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

Okay. Bit strange. So before, just plugged into serial port wasnt working but now using USB-serial it works fine?

If you still want me to look into it, let me know and I can have a look through the debug log file
Post Reply