Matts side projects

If you know what B.S. stands for you know what goes here.

Moderator: Matt

foliage
Posts: 64
Joined: Sat Aug 07, 2010 9:29 pm

Re: Matts side projects

Postby foliage » Sat Oct 29, 2011 4:28 pm

That power figure from a GT3071r on only 15psi in the top range is absolutely incredible, most people are making that on the 76mm with more boost.

I don't think I've seen the 71r make more than 270kw before. How does this dyno's figures compare to others? I realise at the end of the day it is just a tuning tool.

Matt
Site Admin
Posts: 8046
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Matts side projects

Postby Matt » Sun Oct 30, 2011 6:14 pm

Pete can tell you how it measusres, most of the graphs on the PLMS website give an indication of SR20s on that dyno which we could use for comparison

Same dyno from 220rwkw to 280rwkw with the 3071 (+60rwkw) and then 300rwkw with Poncams (+20rwkw)

PL
Posts: 909
Joined: Fri Feb 03, 2006 3:29 pm
Location: Adelaide, South Oz
Contact:

Re: Matts side projects

Postby PL » Mon Oct 31, 2011 11:38 am

I can totally understand why you're sceptical. I wouldn't believe it myself if I'd not seen it with my own eyes.

That dyno reads about middle of the road (seen some local dynos read higher and some lower) - I've tuned heaps of different cars on it and it gives reliable figures, although the boost response always shows slower response than it really is. Once max boost is reached then it is accurate. But the ramp up shows slower on the graph than in real life.

For some reason Matt's car has ALWAYS made more power than it should. I've checked all the dyno settings and they're the same as I always use. And we've had the car on the dyno numerous times and it's consistent.

Even on the original baseline run it made more power than other R34's. Most I've seen will give around the 200rwkw mark with std turbo plus FMIC and better exhaust. Matt's made 220 straight up - without even tuning the ECU. I can only attribute this to the previous owner fitting quality parts - intercooler and exhaust are both top shelf Japanese items.

And then to go to 280 with the 3071 was punching above it's weight again. Poncams always seem to give another 20rwkw. Every SR20 I've fitted them to gives the same. So I was interested to see if they'd do the same on Matt's car - given that the turbo was clearly out of breath. But as per usual the Poncams delivered!

On the road it definitely drives like it's making the power. It's a real winner - and still nice and responsive.

The funny part is that Matt doesn't really care that much. He's not a horsepower junky...

PL

skylinegtrhr
Posts: 292
Joined: Sat Jun 21, 2008 1:50 am
Location: Croatia
Contact:

Re: Matts side projects

Postby skylinegtrhr » Mon Oct 31, 2011 7:49 pm

PL wrote: I can only attribute this to the previous owner fitting quality parts - intercooler and exhaust are both top shelf Japanese items.

So I was interested to see if they'd do the same on Matt's car - given that the turbo was clearly out of breath. But as per usual the Poncams delivered!


So again and again conclusion is same :)

top quality parts make power ...

Torque
Posts: 626
Joined: Wed Jun 16, 2010 10:08 am

Re: Matts side projects

Postby Torque » Tue Nov 01, 2011 3:31 am

skylinegtrhr wrote:
top quality parts make power ...


In the right hands, yes ... ;)

skylinegtrhr
Posts: 292
Joined: Sat Jun 21, 2008 1:50 am
Location: Croatia
Contact:

Re: Matts side projects

Postby skylinegtrhr » Tue Nov 01, 2011 4:14 am

BTW Matt did You mention earlier that You are going to test blow through set up with HPX AFM?

Matt
Site Admin
Posts: 8046
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Matts side projects

Postby Matt » Tue Nov 01, 2011 10:34 am

Its on my R31 fitted but not in use (I've got two AFMs on there!) but plans are in the next week now I have more time to tune this up

foliage
Posts: 64
Joined: Sat Aug 07, 2010 9:29 pm

Re: Matts side projects

Postby foliage » Thu Nov 03, 2011 3:42 pm

Oh also, I'm assuming the turbo has a 0.82 rear end?

PL
Posts: 909
Joined: Fri Feb 03, 2006 3:29 pm
Location: Adelaide, South Oz
Contact:

Re: Matts side projects

Postby PL » Thu Nov 03, 2011 3:49 pm

Nope. 0.63

PL

foliage
Posts: 64
Joined: Sat Aug 07, 2010 9:29 pm

Re: Matts side projects

Postby foliage » Thu Nov 03, 2011 3:59 pm

Know what I will be upgrading to if I get bored of my highflow!

PL
Posts: 909
Joined: Fri Feb 03, 2006 3:29 pm
Location: Adelaide, South Oz
Contact:

Re: Matts side projects

Postby PL » Thu Nov 03, 2011 4:15 pm

Yeah, 3071 with 0.63 rear is a winner. GTX series would be even better!

PL

skylinegtrhr
Posts: 292
Joined: Sat Jun 21, 2008 1:50 am
Location: Croatia
Contact:

Re: Matts side projects

Postby skylinegtrhr » Wed Dec 14, 2011 6:21 pm

Matt wrote:Its on my R31 fitted but not in use (I've got two AFMs on there!) but plans are in the next week now I have more time to tune this up


So did You try HPX AFM ?

Matt
Site Admin
Posts: 8046
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Matts side projects

Postby Matt » Thu Dec 15, 2011 6:24 pm

Havent had a chance to tune it up yet.... still sitting on the car waiting

My Z32 AFM is stuffed on the R31 now so I have no choice but to use the HPX!

Matt
Site Admin
Posts: 8046
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Matts side projects

Postby Matt » Thu May 03, 2012 12:39 am

Final GTS 2 run with high flow T03 turbo, straight through 3" exhaust system upgrade, ER34 MAF (got close to maxing this one out) and GTR injectors

Of all things to happen, the Bosch fuel pump has stopped working on my (suspected something strange going on when started leaning out during recent road testing). So pulled out the fuel pump on the dyno and wired in a walbro instead. Almost four hours later...
Attachments
R31_GTS2_2May12_dyno2m.jpg
R31_GTS2_2May12_dyno2m.jpg (51.51 KiB) Viewed 3867 times
R31_GTS2_2May12_dyno1m.jpg
R31_GTS2_2May12_dyno1m.jpg (50.91 KiB) Viewed 3867 times
2012-05-02 20.23.33m.jpg
2012-05-02 20.23.33m.jpg (113.47 KiB) Viewed 3867 times
2012-05-02 17.45.25m.jpg
2012-05-02 17.45.25m.jpg (181.98 KiB) Viewed 3867 times

PL
Posts: 909
Joined: Fri Feb 03, 2006 3:29 pm
Location: Adelaide, South Oz
Contact:

Re: Matts side projects

Postby PL » Thu May 03, 2012 9:47 am

It actually tuned up quite quickly once the fuel pump issue was sorted. Like most RB30's - they do go very well once all the issues are taken care of.

Just gotta fix that little lean patch off idle...

PL


Return to “B.S.”

Who is online

Users browsing this forum: No registered users and 1 guest