Anyone here have experience with Apexi PowerFc and rb25det ?

If you know what B.S. stands for you know what goes here.

Moderator: Matt

Post Reply
IceManPL
 

Posts: 45
Joined: Wed Apr 22, 2009 7:10 pm

Anyone here have experience with Apexi PowerFc and rb25det ?

Post by IceManPL »

Anyone here have experience with Apexi PowerFc and rb25det ?
Can't find "official" forum/support for Apexi :(
Maybe someone here can help me ?
Have problem with idle.
With stock ecu car idles fine, TPS reporting about 370mV at idle, rpm about 650-700.
With PowerFC car don't want to idle and dies, until i set TPS to 800mV, but then ecu thinks that throttle is slightly open, and "idle" is about 1000-1100 rpm.
Can't start idle learning procedure, like it is advised in manual for PowerFC.
Chris250
 

Posts: 16
Joined: Thu Jul 03, 2014 1:16 am

Re: Anyone here have experience with Apexi PowerFc and rb25d

Post by Chris250 »

the only official forum I know of is the Datalogit group on Yahoo for datalogit owners, you get an invite when you buy one. A handy tool if your planning on doing any tuning of the PFC rather than using the hand controller
STATUS
 

Posts: 119
Joined: Thu Jun 12, 2008 10:30 pm
Location: Melbourne
Contact:

Re: Anyone here have experience with Apexi PowerFc and rb25d

Post by STATUS »

yep the hand controller should never be used for tuning. Half the tables are not accessible via the hand controller.
Post Reply