VEMS not working with nistune

Any wideband device that doesnt have its own category yet.

Moderator: Matt

Post Reply
iceblade
 

Posts: 76
Joined: Wed Feb 11, 2009 9:10 am
Location: BladeRacing.co.uk Bristol U.K.

VEMS not working with nistune

Post by iceblade »

Ive got my vems afr/egt guage all up and running via seriel to usb adaptor, works fine with the megatune software that comes with it, but nistune cannot connect to it,
if i go into the config settings it knows the vems gauge is on com 7 (same as it shows on my laptop in control panel) but when i try to connect using the "WB02 LH" button it says "vems could not connect to com 8"
ive tried chaning com ports but it always sayscould not connect to 1 port higher than i am using....
quite frustrating to tell the truth....
any deas whats going on???
thanks
Joe
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

i did some changes to com ports in recent two versions. i must have missed VEMS from those updates in all the wideband units.

Quick change i'll get that up this weekend
iceblade
 

Posts: 76
Joined: Wed Feb 11, 2009 9:10 am
Location: BladeRacing.co.uk Bristol U.K.

Post by iceblade »

legend mate
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

should be fixed in the 0.9.3.6.1 release. tested today and i dont see any problems with that version in regards to connecting. please let me know if still have problems and get a debug log if you do... scratching my head right now trying to work out the issue
iceblade
 

Posts: 76
Joined: Wed Feb 11, 2009 9:10 am
Location: BladeRacing.co.uk Bristol U.K.

Post by iceblade »

works now thanks buddy, is there any way to change the view from lamda to afr??? os is it lamda only??
thanks matt
Joe
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

File- Configuration - Wideband Display Lambda (tick off)
Post Reply