APSX D2 Connection to Nistune issues

Any wideband device that doesnt have its own category yet.

Moderator: Matt

Post Reply
chefboyrp123
 

Posts: 6
Joined: Thu Aug 26, 2010 8:13 am
Location: Atlantic City, NJ

APSX D2 Connection to Nistune issues

Post by chefboyrp123 »

Hello All! First all, I wanna thank Matt for the awesome product he's created. It has been a godsend for me in many ways.

I am having issues with Nistune recognizing my APSX D2 Wideband sensor. I've wired my DB9 per APSX's instructions for digital output.
Nistune.jpg
(163.05 KiB) Downloaded 6675 times
The APSX Digital Output Software is able to recognize the serial connection and display the correct reading.
Nistune Config.jpg
(278.57 KiB) Downloaded 6675 times
I've configured Nistune (to the best of my ability) to look for the D2 on the correct COMPORT. I have configured the APSX D2 like the UEGO and haven't loaded a Wideband Table.
Terra.jpg
(130.7 KiB) Downloaded 6675 times
The terra display looks bizarre to me (at least compared to a post on this forum). Perhaps this is a contributing factor. Either way, I've order analog to digital USB data collection module to try to connect with the White analog wire.

When attempting to use the Auto AFR, it says enabled, no AFR. Thanks in advance for any advice!

1989 240sx
Blacktop SR20DET
Nismo 555cc Injectors
Tomei Poncams
Z32 MAF
Blitz SE FMIC
chefboyrp123
 

Posts: 6
Joined: Thu Aug 26, 2010 8:13 am
Location: Atlantic City, NJ

Re: APSX D2 Connection to Nistune issues

Post by chefboyrp123 »

Yep, or I'm an idiot and never clicked connect to wideband. I'll try when I get home :oops:
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: APSX D2 Connection to Nistune issues

Post by Matt »

That should do it!

If still issues after attempting connection, then Debug Log enable and email the log
chefboyrp123
 

Posts: 6
Joined: Thu Aug 26, 2010 8:13 am
Location: Atlantic City, NJ

Re: APSX D2 Connection to Nistune issues

Post by chefboyrp123 »

Total operator error lol. Everything works perfect. Thanks!
Post Reply