Datalogging 10 bit stream

Any wideband device that doesnt have its own category yet.

Moderator: Matt

Matt
Site Admin
Posts: 7980
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Datalogging 10 bit stream

Postby Matt » Wed Sep 13, 2017 1:40 pm

Maybe your voltage > AFR translation in the CSV file needs adjusting to be more accurate

Otherwise with the UEGO you can connect a USB>Serial converter to the serial line and feed it direct into Nistune (AEM UEGO section of this forum has the document posted)

Matt
Site Admin
Posts: 7980
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Datalogging 10 bit stream

Postby Matt » Wed Sep 13, 2017 1:41 pm

Also what might help is to log your voltage into the Arduino as a separate channel

Aux2.csv for example make
AEM Volt
0,0
5120,5.12

See if the voltage matches up in Aux2 using a multimeter

iyarovoy
Posts: 39
Joined: Wed Dec 23, 2015 3:47 pm
Location: California

Re: Datalogging 10 bit stream

Postby iyarovoy » Tue Mar 27, 2018 3:27 pm

You can also pipe the 10bin serial stream into python via COM-X, parse it into a Nistune Supported Wideband stream, and pipe out via another COM-Y. Then configure Nistune to use a sported Wideband and select COM-Y as the communications port.

See viewtopic.php?f=31&t=3549#top post from Fri Dec 29, 2017 9:03 pm to get the python module I wrote to test out nistune coms for plx devices.


Return to “Others”

Who is online

Users browsing this forum: No registered users and 2 guests