How do I confiure the LM2 in Nistune?

Anything related to the Innovate brand of wideband devices.

Moderator: Matt

Post Reply
Torque
 

Posts: 639
Joined: Wed Jun 16, 2010 10:08 am

How do I confiure the LM2 in Nistune?

Post by Torque »

Sorry to ask this since it must be documented somewhere,
but how do I configure the LM2 in Nistune?

Selecting 'Innovate MTS' needs a comport .. shouldn't it be USB ?

Thanks for the help,

Andrew
bachig24u
 

Posts: 677
Joined: Mon Jun 01, 2009 11:46 pm
Location: Campbelltown, NSW
Contact:

Re: How do I confiure the LM2 in Nistune?

Post by bachig24u »

It normally gets recognized as an LM2-USB in the list if the drivers are loaded.

can Logworks connect to it?

note: if you start nistune then connect LM2, you will need to close/open nistune after the LM2 is recognized by MS-windows.
Last edited by bachig24u on Mon Oct 11, 2010 12:19 am, edited 1 time in total.
Torque
 

Posts: 639
Joined: Wed Jun 16, 2010 10:08 am

Re: How do I confiure the LM2 in Nistune?

Post by Torque »

Ok ..

I tried to setup the LM2 without having it actually connected.

I will try as you said.

Thanks :)
Post Reply