Base Map section

Questions that get asked a lot.

Moderator: Matt

Post Reply
Topdog781
 

Posts: 51
Joined: Wed Sep 15, 2010 1:14 am

Base Map section

Post by Topdog781 »

I am just curious how come there is no separate section on this forum for base maps alone? If there is where can I find it? This would make it so much convenience for everyone.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Base Map section

Post by Matt »

Base maps are in the ROM pack available on the Nistune website
Topdog781
 

Posts: 51
Joined: Wed Sep 15, 2010 1:14 am

Re: Base Map section

Post by Topdog781 »

Matt wrote:Base maps are in the ROM pack available on the Nistune website
Ok Thankyou Matt.
sizza58
 

Posts: 3
Joined: Thu Jun 14, 2012 8:27 am

Re: Base Map section

Post by sizza58 »

i downloaded rom pack , what actions do i use to view the files ? not sure what program to open it up with ?
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Base Map section

Post by Matt »

Select the vehicle inside Nistune and then open the BIN files using Nistune (File > Open) to view the maps inside
mattlovo
 

Posts: 42
Joined: Fri Jan 01, 2016 10:56 pm

Re: Base Map section

Post by mattlovo »

Hi guys, sorry to jump on an old thread but just wondering, stock and base maps are not the same thing right?
I was thinking of loading my nistune with a stock map to run on 1st with a new set of R35 afm.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Base Map section

Post by Matt »

Base images are the original ECU program (and stock/factory maps) which were downloaded from the Nissan ECU

So base maps = stock maps effectively
mattlovo
 

Posts: 42
Joined: Fri Jan 01, 2016 10:56 pm

Re: Base Map section

Post by mattlovo »

Thanks Matt!
That should help me out with the running of the engine with a new R35 afm whilst on stock map.
Post Reply