Ignition cut limiter

If it isnt a problem or a suggestion it probably goes here.

Moderator: Matt

Post Reply
LooseEndsDrifters
 

Posts: 8
Joined: Thu Mar 15, 2012 8:25 pm

Ignition cut limiter

Post by LooseEndsDrifters »

Would reducing the dwell duty cycle (to 0) cut ignition at that rpm?

Any harm in trying this?
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Ignition cut limiter

Post by Matt »

Likely it might since there would be a 0 charge time. However the tables don't work as you would expect since it uses a scheduler

The scheduler starts with ignition time - dwell time (to charge the coil) and then releases charge when dwell time expires

The RPM table simply increases the dwell time to keep dwell time constant throughout the RPM range (as RPMs increase the pulses used to generate final dwell time decrease)

The only dangers in trying it are having a period of time of fuel injecting when there is no spark
Post Reply