Type 1 board on CA18ET

If it isnt a problem or a suggestion it probably goes here.

Moderator: Matt

Post Reply
Marty
 

Posts: 6
Joined: Tue Mar 18, 2014 12:58 am

Type 1 board on CA18ET

Post by Marty »

Type 1 board with S12_CA18ET_33F01 ROM loaded. Car is now fitted with S14 MAF and 370cc injectors.
When I go to resize injectors, old = 270cc, new = 370cc the car won't run?
Confirmed injector sizes etc and found that if I enter old 370cc and new = 270cc the K value is correct and the car will run. Think I'm getting knock now but will look into that when I get time. Just thought I'd post this in case it helps anyone else? Is it a bug or have I misunderstood?
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Type 1 board on CA18ET

Post by Matt »

Did you also change your MAF size?

Try increasing K constant until engine runs again. There is no bug in the injector resize in the software
Post Reply