Page 1 of 1

Help me fix my consult cable (pics inside)

Posted: Fri May 08, 2015 3:50 am
by immy21
EDIT: Solved

Need some help please to repair my Blazt cable bought approx 4-5 years ago

Brown (more faded colour) and Orange (stronger colour) have became detached and I don't know which way round I need to solder them back in. I don't want to damage anything, particularly my ECU so thought it would be best to ask rather than trial and error.
I had a look at the DIY cable guide but I couldn't figure it out.

A. has a track going to that 3 leg component (KZ3 T3), the track leads to the single leg of the component.

I can't really work out were the track for B leads to.

EDIT: Updated

A= 4. CLK brown
B= 2. TX orange
C= 3. RX yellow
D= 5. GND black
E= 1. 12v red

Image

Image

Image

Image

Image

Re: Help me fix my consult cable (pics inside)

Posted: Fri May 08, 2015 5:51 pm
by Matt
Sorry not sure. Can only help with PLMS ones

Re: Help me fix my consult cable (pics inside)

Posted: Sat May 09, 2015 7:20 pm
by skylinegtrhr
I'm also using only PLMS but try to post this on NissanDataScan forum there are some Blatz users for sure ...

Re: Help me fix my consult cable (pics inside)

Posted: Sat May 09, 2015 9:02 pm
by immy21
I have a S15, after looking at PLMS consult plug wiring guide realised S15's don't have CLK.

Fixed it and working fine now. I'v updated the table above for future reference.
Thanks for the reply's.


Image

Re: Help me fix my consult cable (pics inside)

Posted: Sun May 10, 2015 1:39 pm
by Matt
S15 does used CLK (but not CHK check)

Only ER34/WC34 and later models with SR20VE dont use CLK any more

Re: Help me fix my consult cable (pics inside)

Posted: Fri Jun 02, 2017 5:46 am
by IceManPL
i need help too
what is R1 value ?

Re: Help me fix my consult cable (pics inside)

Posted: Sat Jun 03, 2017 12:14 pm
by Matt
Best to email PL @ plmsdevelopments.com

Re: Help me fix my consult cable (pics inside)

Posted: Fri Jun 09, 2017 6:22 am
by IceManPL
thx, but no response from them :(

Re: Help me fix my consult cable (pics inside)

Posted: Sun Jun 11, 2017 9:51 pm
by Matt
emailed him with link to this