Help me fix my consult cable (pics inside)

If it isnt a problem or a suggestion it probably goes here.

Moderator: Matt

Post Reply
immy21
 

Posts: 38
Joined: Tue Jan 04, 2011 7:20 am
Location: Edinburgh, UK

Help me fix my consult cable (pics inside)

Post by immy21 »

EDIT: Solved

Need some help please to repair my Blazt cable bought approx 4-5 years ago

Brown (more faded colour) and Orange (stronger colour) have became detached and I don't know which way round I need to solder them back in. I don't want to damage anything, particularly my ECU so thought it would be best to ask rather than trial and error.
I had a look at the DIY cable guide but I couldn't figure it out.

A. has a track going to that 3 leg component (KZ3 T3), the track leads to the single leg of the component.

I can't really work out were the track for B leads to.

EDIT: Updated

A= 4. CLK brown
B= 2. TX orange
C= 3. RX yellow
D= 5. GND black
E= 1. 12v red

Image

Image

Image

Image

Image
Last edited by immy21 on Sat May 09, 2015 9:05 pm, edited 2 times in total.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Help me fix my consult cable (pics inside)

Post by Matt »

Sorry not sure. Can only help with PLMS ones
skylinegtrhr
 

Posts: 301
Joined: Sat Jun 21, 2008 1:50 am
Location: Croatia
Contact:

Re: Help me fix my consult cable (pics inside)

Post by skylinegtrhr »

I'm also using only PLMS but try to post this on NissanDataScan forum there are some Blatz users for sure ...
immy21
 

Posts: 38
Joined: Tue Jan 04, 2011 7:20 am
Location: Edinburgh, UK

Re: Help me fix my consult cable (pics inside)

Post by immy21 »

I have a S15, after looking at PLMS consult plug wiring guide realised S15's don't have CLK.

Fixed it and working fine now. I'v updated the table above for future reference.
Thanks for the reply's.


Image
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Help me fix my consult cable (pics inside)

Post by Matt »

S15 does used CLK (but not CHK check)

Only ER34/WC34 and later models with SR20VE dont use CLK any more
IceManPL
 

Posts: 45
Joined: Wed Apr 22, 2009 7:10 pm

Re: Help me fix my consult cable (pics inside)

Post by IceManPL »

i need help too
what is R1 value ?
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Help me fix my consult cable (pics inside)

Post by Matt »

Best to email PL @ plmsdevelopments.com
IceManPL
 

Posts: 45
Joined: Wed Apr 22, 2009 7:10 pm

Re: Help me fix my consult cable (pics inside)

Post by IceManPL »

thx, but no response from them :(
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Help me fix my consult cable (pics inside)

Post by Matt »

emailed him with link to this
Post Reply