Nistune Release 1.2.99

If it isnt a problem or a suggestion it probably goes here.

Moderator: Matt

Matt
Site Admin
Posts: 8147
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune Release 1.2.84

Postby Matt » Sat May 26, 2018 1:40 pm

P11 was accidently missed from the update 'notes' in this thread

However the P11 files were definitely all updated internally 7 Feb 2018 for 2J20F, 3J40F, 3J50F, 3J80F and 3J90F and included in the subsequent FP release 2.5 (not 2.8?)

Please note latest version numbers are ROM pack 2.12 (standard Nissan files) and FP ROM pack 2.5 (FP firmware updates)

Once ROM packs are updated, the Base image programmer (BIP) is required to reflash the boards with updated firmware if you want the increased RPM limiter functionality

noynek
Posts: 4
Joined: Mon Aug 22, 2016 9:06 am

Re: Nistune Release 1.2.84

Postby noynek » Sun May 27, 2018 2:05 pm

Thanks Matt, I'm just a little confsed about one thing. I went to the Nistune website to check to see if the latest FP rom pack was 2.5 , The one listed is 2.7 . So I downloaded the exe it and I installed independently without launcing Nistune.Then according to what I had the the Nistune Directory on my PC I went "back" to 2.7 from "2.8" Then I started Nisune and was immediately prompted via a dialog box that there was a FP update to 2.8.
I just realised that this may belong in the "FP update thread" So I'm sorry if it does. I'll let this be my last point on this.
I just want to be in sync with what is current and has all latest improvememnts

Cheers
Nistune Screen.jpg
Nistune Screen.jpg (91.1 KiB) Viewed 1917 times
.

Matt
Site Admin
Posts: 8147
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune Release 1.2.84

Postby Matt » Mon May 28, 2018 5:15 pm

Ah I haven't updated the link on the downloads page, after uploading the newer version and auto-updater. Okay that is fixed:
NIStune FP 2.0 ROM File Pack 2.8 (EXE)
Released 1 May 2018

Matt
Site Admin
Posts: 8147
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune Release 1.2.84

Postby Matt » Thu Jun 14, 2018 8:23 pm

With regards to the ENTER window, that is now fixed:
http://www.nistune.com/mantis/view.php?id=204

Some tricky ones, like processing timing (filtered) has max value 255 converted to -1 which is why the max check for adding failed. Also check OK button pressed before applying changes. For next build

Matt
Site Admin
Posts: 8147
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune Release 1.2.84

Postby Matt » Thu Jun 28, 2018 10:11 pm

Version 1.2.86
Remove 'small' icons and right click adjustment
Add DPI detection and scaling icons
Fix Import selected maps from ROM
Remember last image path from import
Fix columnn display and sizing for various selections, disable scroll bars
Fix 'select consult' registers when connected
Fix gauges automatically opening when consult connected, add tickbox to disable
Fix BNR32 TPS index maptracing

(internal test release)
Version 1.2.85
Clear maps when clearing 'comparison' image
Fix 16 bit wraparound for display tables
Create new registry keys if run under different user
Add additional later model tables
Add tickbox to skip software updates
Remove autotune VE map (not to be used). Rename VE to throttle enrichment map
Remove ADDRESS entries translation internals, use linked list lookup table
Add TimyXML parsing for address processing, removing hard coding
Fix thousand comma bug affecting AFR trace and auto tune views
Add comment field to address entries and software
Optimise image parsing during load and select images
Fix primary image copy
Fix data entry diaglog window (maximum entry limitation)

Matt
Site Admin
Posts: 8147
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune Release 1.2.84

Postby Matt » Wed Jul 04, 2018 12:46 pm

Did a rebuild of the 1.2.86 installation package (re-uploaded today)

Was missing an updated file containing address definition updates (some of the scalers were not displaying correctly, FP maps not identified etc)

Matt
Site Admin
Posts: 8147
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune Release 1.2.84

Postby Matt » Fri Jul 06, 2018 2:50 pm

Version 1.2.87
Delta display calculation fix
Remove DPI calculations on parameter list (hides constants)
Add DPI scaling to consult, knock panel, wideband panel, speed trial, keyboard panel, table display
Update font sizing for auto tune view, constant table view
Fixes for table indexes all displayed as 'value'


Further DPI/display updates for higher resolution screens

Matt
Site Admin
Posts: 8147
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune Release 1.2.88

Postby Matt » Thu Jul 26, 2018 12:37 pm

Includes fix for Windows 10 'tablet' mode distorting top panel

Version 1.2.88
Add right click context menu framework, remove right click from all other windows
Extra fixes for 'enter' changes to adjusting fuel and timing map
Add C2 RAM write
Add C2 ECU ID search function
Fix for consult button refresh on disconnect/disconnect
Fix for ECU part number detection, and heap indexing out of bounds
Remember previous paths when browsing address files
Add checksum verification and display validity in mainframe
Fix draw map scaling
AFR trace updates based on map availability (resolve crash when no fuel/timing map avilable)
Windows 10 (tablet mode) fix on ImageSelPanel view initialisation

Matt
Site Admin
Posts: 8147
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune Release 1.2.89

Postby Matt » Sat Jul 28, 2018 5:34 pm

Interim test release

Version 1.2.89
Keep minimised windows to RHS of parameters panel
Do not record window position when minimising window
Prevent Autotune opening when no HIGH_FUEL map available
Consult guages view maximising adjust window sizing
Make gauges view frames even

Matt
Site Admin
Posts: 8147
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune Release 1.2.90

Postby Matt » Sat Aug 11, 2018 12:30 am

Version 1.2.90
CR0000161: Update display scheduler to wait response on display updates
Remove scroller from comms threads, update from scheduler
Dipslay update optimisation only with data change

Matt
Site Admin
Posts: 8147
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune Release 1.2.91

Postby Matt » Mon Aug 13, 2018 12:31 pm

Version 1.2.91
Fix DPI for copy icon
Add 'force' parameter for display updates to rectify side panel not refreshing

Matt
Site Admin
Posts: 8147
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune Release 1.2.92

Postby Matt » Tue Aug 14, 2018 12:46 pm

Version 1.2.92
Put gridview horiztonal resizing back
Constant offset fix. Update to -50..205 range

Matt
Site Admin
Posts: 8147
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune Release 1.2.92

Postby Matt » Mon Aug 20, 2018 12:49 pm

Version 1.2.93
Fix broken copy button from previous release
Add 'consistent' size parameter option to keep all maps same size dimensions
Refresh window resize (top panel) on window focus. Fix for windows tablets which do not call size fns

DerekG47
Posts: 1
Joined: Mon Apr 16, 2018 12:05 pm

Re: Nistune Release 1.2.92

Postby DerekG47 » Wed Sep 12, 2018 4:09 pm

I'm having issues with installations with the new update. 1.2.93
Unable to execute file:
C:\Program Files (x86)\Nistune\Nistune.exe

CreateProcess failed; code 740.
The requested operation requires elevation.


Help?

Matt
Site Admin
Posts: 8147
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune Release 1.2.92

Postby Matt » Tue Sep 18, 2018 9:15 am

Make sure you are administrator (or install as administrator) if you are unable to run the installer


Return to “General Nistune Discussion”

Who is online

Users browsing this forum: No registered users and 8 guests