Feature Pack updates + Information thread

If it isnt a problem or a suggestion it probably goes here.

Moderator: Matt

Post Reply
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Feature Pack updates + Information thread

Post by Matt »

The Z32 files you mention are just standard 41P03 Z32 ENT firmware (there is no code change). If you want feature pack and have a base image programmer then use the 41P0F 'no flex' ENT file

There are minor map fixups from V3 to V4 which you can check out if you compare both files inside Nistune. Idle/decel timing fixed up and also AlphaN Increase fuel fixed up from memory
Bgtym
 

Posts: 63
Joined: Thu Sep 26, 2013 1:32 am

Re: Feature Pack updates + Information thread

Post by Bgtym »

order to use the (Z32_FOR_RB25DET_41P03_MT_v4_FP_maps.bin) I have to write down the base image (Z32_VG30DETT_41P0F_MT_JDM_FP.ent)
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Feature Pack updates + Information thread

Post by Matt »

Only if you want feature pack. If you have standard 41P03 or similar then that will work also

There has been an update to feature pack release (Version 2.1 uploaded today) since my R34 AA50F file had a stagea (0V80F) part number in it, plus the executable required code signing
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Feature Pack updates + Information thread

Post by Matt »

Code: Select all

Model	Part	TIM	LC	FF	Fan	VCT
R31/VL RB30ET	B490F	Y	Y	Y		
R31/VL RB30ET	B491F	Y	Y	Y		
Z31 VG30ET	26P00	Y	Y	Y		
						
S13 CA18DET JDM	36F05	Y	Y	Y		
S13 CA18DET EDM	39F00	Y	Y	Y		
S13 CA18DET EDM	44F00	Y	Y	Y		
		Y				
BNR32 RB26DETT	05U6F	Y	Y	Y		Y
BNR32 RB26DETT	05U6F	Y	Y	Y		
	08U0F	Y	Y			
R32 RB20DETT	11U0F	Y	Y	Y		Y
R32 RB20DETT	11U1F	Y	Y	Y		
R32 RB25DET (VCT)	11U0F	Y	Y	Y		Y
R32 RB25DET (VCT)	11U1F	Y	Y	Y		Y
						
M30 VG30E	F661F	Y	Y			
M30 (TB45E adaption)	F661F	Y			Y	
						
Z31 VG30DETT JDM	41P0F	Y	Y	Y	F	
Z31 RB25DET	41P0F RB25	Y	Y	Y	F	
Z31 VG30DETT JDM	41P1F	Y	Y	Y	F	
Z31 RB25DET	41P1F RB25	Y	Y	Y	F	
Z31 VG30DETT EDM	37P0F	Y	Y	Y	F	
Z31 VG30DETT USDM	31P0F	Y	Y	Y	F	
Z31 VG30DETT USDM	31P1F	Y	Y	Y	F	
Z31 VG30DETT EDM	47P1F	Y	Y	Y	F	
						
		Y				
R34 RB25DET	AA50F	Y	Y	Y	F	
R34 RB25DET	AA51F	Y	Y	Y	F	
R34 RB25DET	AA56F	Y	Y	Y	F	
R34 RB25DET	AA57F	Y	Y	Y	F	
C34 RB25DET Stagea	0V80F	Y	Y	Y	F	
C34 RB25DET Stagea	0V81F-2	Y	Y	Y	F	
C34 RB25DET Stagea	0V81F-4	Y	Y	Y	F	
Y33 VQ30DET	4P20F	Y	Y	Y	F	
Y33 VQ30DET	6P50F	Y	Y	Y	F	
						
A32 VQ30DE	40U0F	Y	Y			Y
A32 VQ30DE	40U1F	Y	Y			Y
A32 VQ30DE	50U1F	Y	Y			Y
						
B14 SR20DE	1M86F	Y	Y		Y	Y
B14 SR20DE	1M87F	Y	Y		Y	Y
G20 SR20DE	02J0F	Y	Y		Y	Y
G20 SR20DE	0J60F	Y	Y		Y	Y
S14 KA24DE	0J61F	Y	Y		Y	Y
S14 KA24DE	70F0F	Y	Y		Y	Y
S14 KA24DE	72F0F-1	Y	Y		Y	Y
S14 KA24DE	72F0F-2	Y	Y		Y	Y
						
S13 SR20DET	50F0F-1	Y	Y	Y	Y	
S13 SR20DET	50F0F-2	Y	Y	Y	Y	
S13 SR20DET	50F1F-1	Y	Y	Y	Y	
S13 SR20DET	50F1F-2	Y	Y	Y	Y	
S13 SR20DET	60F0F	Y	Y	Y	Y	
RNN14 SR20DET	54C0F	Y	Y	Y	Y	
RNN14 SR20DET	69C0F	Y	Y	Y	Y	
						
B13 SR20DE	64U0F	Y	Y	Y	Y	Y
B13 SR20DE	67Y0F	Y	Y	Y	Y	Y
B13 SR20DE	71Y0F	Y	Y	Y	Y	Y
P10 SR20DE	70J0F	Y	Y	Y	Y	Y
P10 SR20DE	70J1F	Y	Y	Y	Y	Y
J30 VE30DE	17Y1F	Y	Y	Y		
S13 SR20DE	52F0F	Y	Y	Y	Y	Y
S13 KA24DE	53F0F	Y	Y	Y	Y	Y
S13 KA24DE	53F1F	Y	Y	Y	Y	Y
						
S14 SR20DET JDM	74F0F/1	Y	Y	Y	Y	F
S14 SR20DET JDM	74F1F	Y	Y	Y	Y	F
S14 SR20DET EDM	75F0F	Y	Y	Y	Y	F
S14 SR20DET EDM	75F1F	Y	Y	Y	Y	F
S14A SR20DET JDM	80F0F	Y	Y	Y	Y	F
S14A SR20DET JDM	82F0F	Y	Y	Y	Y	F
S14A SR20DET EDM	82F1F	Y	Y	Y	Y	F
S14A SR20DET ADM	83F0F	Y	Y	Y	Y	F
S14A SR20DET ADM	83F1F	Y	Y	Y	Y	F
S15 SR20DET JDM	91F0F	Y	Y	Y	Y	F
S15 SR20DET JDM	91F1F	Y	Y	Y	Y	F
S15 SR20DET ADM	93F0F	Y	Y	Y	Y	F
S15 SR20DET ADM	93F1F	Y	Y	Y	Y	F
P11 SR20DE	3J90F	Y	Y	Y	Y	Y
P11 SR20DE	3J80F	Y	Y	Y	Y	Y
P11 SR20DE	3J40F	Y	Y	Y	Y	Y
P11 SR20DE		Y	Y	Y	Y	Y
						
B13 GA16DE	81R0F/0	Y	Y			
B13 GA16DE	81R0F/5	Y	Y			
S14 SR20DE	65F0F	Y	Y	N	Y	F
						
Y60 TB42	35J0F	Y				
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Feature Pack updates + Information thread

Post by Matt »

Added Feature Pack V2 release (beta) for limited range of vehicles
omnigear
 

Posts: 31
Joined: Mon Sep 30, 2013 6:36 pm

Re: Feature Pack updates + Information thread

Post by omnigear »

Matt wrote:Added Feature Pack V2 release (beta) for limited range of vehicles
Do feature v1 boards need another reflash or just download the new nistune software?
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Feature Pack updates + Information thread

Post by Matt »

If you want to use the FP2 V2 it will need a reflash to upload new firmware into the ECU. Note this is only availaable for S14-S15 and ER34/WC34 as per updated post on first page of this thread
danielp11
 

Posts: 12
Joined: Thu Feb 26, 2015 1:32 am

Re: Feature Pack updates + Information thread

Post by danielp11 »

Any chance of a 3j501 feature pack for p11 primera. My k value is way off to get the fuelling right and final injection multiplier badly needed.

Cheers
Daniel.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Feature Pack updates + Information thread

Post by Matt »

Too many variants of the P11 SR20 code :(

Yes but your board will need to be reflashed for the upgrade. Cost of $40 for the firmware update itself plus flashing $40 and postage if sending it here
kairo
 

Posts: 3
Joined: Tue May 31, 2016 8:59 am

Re: Feature Pack updates + Information thread

Post by kairo »

Hello colleges,

I have Nistune type2 installed in my Z32. My ECU base is an 41P60, and now I would like to add Feature Pack V1 to play with LC.
My question is which base image with FP should I use. The manual says: "If you cannot find a file for your ECU, you may be able to use a similar file". But for an 41P60 (USDM manual TT), which one is the similiar one? 41P0F, 41P1F, 47P1F?

Thank you very much.

NOTE: I purchased Nistune this year, so I suppose I have the right firmware in the board to use FeaturePack V1.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Feature Pack updates + Information thread

Post by Matt »

We would use the 41P0F (this is the best match to 41P60)
kairo
 

Posts: 3
Joined: Tue May 31, 2016 8:59 am

Re: Feature Pack updates + Information thread

Post by kairo »

Thanks Matt.

I have a problem.
I prepared the 41P0F with my maps, and i want to upload it to my ECU. But when connecting to it, Nistune detects 41P60 so wants to change to the normal adress file without FP. How i install FP adress file into my ECU?
As I bought it this year it should come with the right firmware to use these features, isn't?

Thank you again.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Feature Pack updates + Information thread

Post by Matt »

Sounds like it was programmed with 41P60. Depends where you got it from and who programmed it. With Z32 I only started loading in feature pack from about July this year when updating the firmware
kairo
 

Posts: 3
Joined: Tue May 31, 2016 8:59 am

Re: Feature Pack updates + Information thread

Post by kairo »

I understand.

I bought it new directly in nistune.com, but was May 27th this year. :(

I was thinking all new boards were delivered with updated firmware with FP, as is written in the news from nistune.com on February 26th 2015.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Feature Pack updates + Information thread

Post by Matt »

I can do an upgrade for you. There were some reported issues with the Z32 feature pack which needed investigating, so I did not put it on customers boards until it was all retested
Post Reply