Nistune Formal Release 1.2.21 [update]

[louiswun]

Hi Matt,

VQ transfer generator message box show this

[Matt]

http://nistune.com/docs/Nistune%20MAF%2 ... 0Notes.pdf

Thanks. Fixed in 1.2.18 tonight. Should work with users other than matt

[RiBs]

Hi Matt, do you know if there is a possibility to have the flex fuel and others features on S13 CA18DET?

[Matt]

Yes I plan on adding it after the others are done

[RomChip200]

In the manual, you mention the flex sensor input (after freq to 0-5V conversion) is fed into the diag (potentiometer) input of the ECU.
On Z32, could you tell the ADC channel number used for such ? I never spent time identifying it.
Diag potentiometer is connected to ADC HD63140 input !? (using ADC is rich for such purpose ....)

[Jono]

Has anyone managed to get their Nistune running flashing the board with a programmer to the new beta flex update?

Mine won't connect any more

[Matt]

Romchip - see your email
Jono - I'm doing another update this week. Will retest BNR32 after some code updates

[Jono]

Romchip - see your email
Jono - I'm doing another update this week. Will retest BNR32 after some code updates

Thanks matt - Sorry to hear about your injury, I hope it gets better soon.

So do you think that the whole no connection part could be the firmware update?

[Matt]

Version 1.2.19
Add TPS enrich pink cursor map trace
Fix purge valve map trace
Add NATS2 register
Add debug info for translation load crash (WinXP)
Fixes for feature pack files:
S14, S15, P11, HCR32, BNR32, Z32 all tested 16x16 fuel and timing maps

Another test version. Updated firmware for all models with 16x16 fuel and timing maps. This also allows for doing map switching (well using an offset for second set of maps) without a flex sensor on both sets of maps. Use the diag input switched against ground/12V to set the 0/100% input and then use this to enable the maps.

HCR32/BNR32/Z32 fully tested and ready for use on customer vehicles. S14-S15 doing another dyno run on Monday but these should be good to go based from current street testing

Next updates are ER34 RB25 (75% complete), S13 CA18DET (50% complete) and S13 SR20DET (75% complete)

[louiswun]

Next updates .......... S13 CA18DET (50% complete) and S13 SR20DET (75% complete)

Thumbs UP !

[Matt]

I've got your boards here still louis. I made up a S14 SR20DET > S14A SR20DET patch loom yesterday for testing 74F00/75F00 in my vehicle. Doing that this morning before posting both the board and programmer back!

[Matt]

Installed was updated today with fixes for S14 SR20 files for 74F00/75F00 to fix launch control activation

[Matt]

Version 1.2.20
Add FP1 address files for S13/RNN14 SR20DET, P10/B13 SR20DE, S13 KA24DE
Add wall flow enrichment tables for BNR32 GTR, Z32 300ZX
Add AAC valve gauge for S13 CA18DET
Select translation file crash fix (Windows XP)
Remove flex fuel and low AFM trigger parameters from import maps (for FP1)

New ROM pack also released 2.9 with the latest updated ENT files for tested vehicles

S13/RNN14 SR20DET, P10/B13 SR20DE, S13 KA24DE - These ECUs are 90% complete. Just need to fix a bug with flex temp enrichment and retest the ECUs on the bench. S13/RNN14 I can vehicle test but the others bench only
S13 CA18DET - About 70% of the work is done and I've made up a patch loom for testing this one in my S14
ER34 RB25DET - About 90% Some bug was found when dyno testing with injection so need to check that out further

[Matt]

Version 1.2.21
Add updates for B13 SR20DE (VCT)
Add resize tickboxes for VQ transfer panel
Fix VQ transfer panel save
Update UEGO naming and add support for ASPX wideband
Resize MAF adjusts K constant
Add fuel map AFR display for VE map enabled ECUs
Do not clear image on unsuccessful load
Add more tool tips
Move VQ transfer save file and folder to VQ map
Remove TPS idle position from Z32 (Alpha/N map instead)
Fix ECU file identification bug for 32KB files
Fix NEO boost limit, TTPmax only table and TP limit table definitions
Remove unused A32/Z32 1996 TTP
Add safety RPM/TP limit to R32 GTR
Fix different dwell time for RNN14
Add VCT parameters for N14 SR20DE/B13 GA16DE
Add R34 warmup timing parameters
Add Y61 TB45 basic parameters only
Add M30 fan control firmware address support