Nistune Release 1.2.77

If it isnt a problem or a suggestion it probably goes here.

Moderator: Matt

Matt
Site Admin
Posts: 7662
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune Release 1.2.75

Postby Matt » Wed Mar 29, 2017 10:05 am

This warning is on all models. I should also add a warning for DTC codes.... some tuners are tuning with things like knock fault code active... or if the neutral switch is stuck on all the time. So many things to check (especially when people do transplants with bad wiring)

Matt
Site Admin
Posts: 7662
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune Release 1.2.78

Postby Matt » Fri Oct 06, 2017 5:50 pm

Version 1.2.78
Split S14A/S15 address files for changes to warmup tables between versions (CR0000185)
Add FLEX_CRANK_ENRICH_OFFSET back to WC34 FP1 address file
Remove TTP_MIN table definition from BASE_SR20_LATE_512_E.ADR as not used by targeted ECU (ie VE base ones, P11 SR20DE)
Fixes for log progressing rounding issues (CR0000186)
Fix naming of 'gauge'
Resolve consult serial port issues. Timeout causes overlapped termination. Resolve connection issues (CR0000184)
Add maptracer 'reset all' button (CR0000157)
Add double click close windows (tables, constants, flags)
Resolve ECU showing FP gauges when not FP enabled (CR0000180)
Remove RB30 O2 flag (CR0000182)
Double RB30/VG30/CA18 injection duty when batch mode halves injection time (CR0000183)
Reduce white blaance on Trace Window (CR0000179)
Fix incorrect labels for LHS/RHS O2 sensor (eg Z32)
Update Z32 AFR learn and knock min thresholds


Managed to finally get some time to do updates this week to the software. I'll try and work more through the list. I still have a few firmware items to investigate too, so have to balance those two

omnigear
Posts: 30
Joined: Mon Sep 30, 2013 6:36 pm

Re: Nistune Release 1.2.77

Postby omnigear » Fri Oct 27, 2017 12:29 pm

Matt can we get a pinned thread that only you can post and edit on what changes have been done to nistune, like a Patch notes thread. It is cumbersome looking for what has changed for X board or if X feature is in beta/added/in-progress. So it would be every post is every major patch or revision.

Matt
Site Admin
Posts: 7662
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune Release 1.2.77

Postby Matt » Sun Oct 29, 2017 10:50 am

Our release notes included with the software package have each update done so far

With the feature pack releases that is at the first post in the Feature Pack thread

Other changes done/finished can be found at www.nistune.com/mantis

This can be searched or filtered for open/in progress/resolved/closed items

Matt
Site Admin
Posts: 7662
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Nistune Release 1.2.77

Postby Matt » Thu Dec 07, 2017 5:20 pm

Version 1.2.79
Update Z32 address files (remove RHS O2) and use rich/lean, lean/rich and ready trigger parameters
AFR trace view window resize (beta)
Replace VQ 'none found' with better message
Bug Fix for negative log numbers (from 1.2.78)
Add JWT_lightning_VQ_map.bin
Updates for Comodo sodesigning from Dec 2017
Check ECU synced before doing PIN lock, fixe bug causing error after PIN lock
Map copy window updated to highlight the maps which differ between compare/main
Engine sim speed up fixes
Add new U12 BIN and N15 GA16DE BIN support


Been a number of weeks since last version. I've had an accident on my mountain bike (dislocated shoulder, factured arm and finger, damaged nerves)... so now out of a sling again and recovering. I'm putting this one up as another test version. The AFR trace view resize appears to work but not fully tested. Still to work on performance issues, but I've not received any updated logs to work with


Return to “General Nistune Discussion”

Who is online

Users browsing this forum: No registered users and 5 guests