How to enable launch control N14 feature pack ECU

Discussions concerning the M7790 cpu

Moderator: Matt

Post Reply
MJD5SS
 

Posts: 45
Joined: Wed Apr 17, 2013 6:24 pm

How to enable launch control N14 feature pack ECU

Post by MJD5SS »

G'day matt, I have a N14 ECU and a nistune board with N14_SR20DE_68C0F_MT_MT_FP_maps installed on it. Just need to know how do you enable the launch control?

I played around with these settings and nothing happens, also is the launch control partial throttle activated or does it have to be wide open throttle?
Thank you in advance.
https://imgur.com/a/R9GzYXy

Image
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: How to enable launch control N14 feature pack ECU

Post by Matt »

Feature pack documentation:
https://www.nistune.com/docs/Nistune%20 ... k%20V1.pdf

1. Enable LC + launch flash
2. When CEL flashing, it is enabled
3. Set RPM limit, and speed to disable (eg 20 km/h)
4. LC will disable and CEL stop flashing over 20km/h

Retard limit and timing can be set separately once you have the first bit working
MJD5SS
 

Posts: 45
Joined: Wed Apr 17, 2013 6:24 pm

Re: How to enable launch control N14 feature pack ECU

Post by MJD5SS »

Cheers matt :twisted: :o
MJD5SS
 

Posts: 45
Joined: Wed Apr 17, 2013 6:24 pm

Re: How to enable launch control N14 feature pack ECU

Post by MJD5SS »

https://youtu.be/kGb3hcTgysE

Hey matt! I played around with all rpm settings and this is the max I can rev it, also the check engine light is flashing all the time.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: How to enable launch control N14 feature pack ECU

Post by Matt »

So once your speed goes over say 20km/h it does not stop flashing?
Does Nistune report a speed signal?
MJD5SS
 

Posts: 45
Joined: Wed Apr 17, 2013 6:24 pm

Re: How to enable launch control N14 feature pack ECU

Post by MJD5SS »

Yes it does stop flashing and nistune is reporting a speed signal. I still can't rev it any higher. I also copied the settings in this video and still got the same result. https://youtu.be/im5to9u0n6Y
MJD5SS
 

Posts: 45
Joined: Wed Apr 17, 2013 6:24 pm

Re: How to enable launch control N14 feature pack ECU

Post by MJD5SS »

Also tried these settings, and the max I can rev is 3000rpm

Image
Post Reply