R34 RB25 NEO cut load !!!

Discussions concerning the M7790 cpu

Moderator: Matt

Post Reply
Arnaud-S
 

Posts: 1
Joined: Wed Jun 06, 2018 1:53 am

R34 RB25 NEO cut load !!!

Post by Arnaud-S »

Hi.


I have a small question about a Nissan Skyline R34 neo.

On the vehicle there is a maf Z32 and injector nismo 740 cc Side feed.

the problem I have about the vehicle comes from the boost pressure information.

I blast at 1 bar, but in the map, even changing the scale the pressure goes to bottom (255).

attached, a short video.

https://we.tl/t-TF5zPCgoPa
base V3.bin
(64 KiB) Downloaded 56 times

Is there a calibration to be done somewhere?

Best regard

PS: I'm French sorry for my English have basic :oops:

Arnaud
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: R34 RB25 NEO cut load !!!

Post by Matt »

Best to also post log file. I saw your email with video (but no tune file)

Please read our NEO tuning guide:
http://nistune.com/docs/Nistune%20NEO%2 ... Tuning.pdf

I can see you have not changed:
Load (TP) cut
Boost sensor fuel cut
Boost sensor limit counter
Load limit max counter

Please try increasing those tables/values as per the tuning guide
Post Reply