RB25NEO in s13 240sx not recognising load.

Discussions concerning the M7790 cpu

Moderator: Matt

Post Reply
PREracing
 

Posts: 2
Joined: Sat Dec 10, 2011 11:04 am

RB25NEO in s13 240sx not recognising load.

Post by PREracing »

Running z32 MAF, no MAP sensor and 1000cc injectors. I've set it up and the vehicle starts, idles, and drives well but in software all the 3d tables only recognize the first column of load. MAF voltage is moving, RPM is recognized by the ECU so why wouldn't it be calculating load? Any help would be greatly appreciated.

Board type is ER34 skyline, base map file was "ER34_RB25DET_AA50F_MT_FP_maps"

I know I'm probably missing something really simple. Any help would be appreciated.
PREracing
 

Posts: 2
Joined: Sat Dec 10, 2011 11:04 am

Re: RB25NEO in s13 240sx not recognising load.

Post by PREracing »

Search button! lol. Fixed the problem reading a further thread.

Display -> Select Consult Monitors -> select BFuel Schedule.

You can delete this thread if you want or leave it up to help anyone else who might have this issue.

Thanks
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: RB25NEO in s13 240sx not recognising load.

Post by Matt »

Thats fine - I'll leave it here. Need to force it on again somehow :?
Post Reply