Problems flashing featurepack

Discussions concerning the M7790 cpu

Moderator: Matt

Post Reply
Tommey
 

Posts: 31
Joined: Thu Jul 31, 2014 7:30 am

Problems flashing featurepack

Post by Tommey »

Trying to flash the featurepack to my type 4 Board.
I can`t find an exact match to my ECU so i tried the one marked in the Attached photo.
Does not work.
Wich one to use?

Thanks!
11269580_10155580137285150_309289288_n.jpg
(76.75 KiB) Downloaded 3874 times
11272046_10155580137130150_560488007_n.jpg
(192.77 KiB) Downloaded 3874 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Problems flashing featurepack

Post by Matt »

Use 82F0F (replaces anything with 82F0x in it)
Tommey
 

Posts: 31
Joined: Thu Jul 31, 2014 7:30 am

Re: Problems flashing featurepack

Post by Tommey »

I tried that one with no success. Any tricks when it wants to change address files?
I need to be able to load my map in.
unex
 

Posts: 86
Joined: Sat Aug 06, 2011 6:59 am

Re: Problems flashing featurepack

Post by unex »

Tommey wrote:I tried that one with no success. Any tricks when it wants to change address files?
I need to be able to load my map in.
I would suggest you to explain in details what does it mean "I tried that one with no success."
Tommey
 

Posts: 31
Joined: Thu Jul 31, 2014 7:30 am

Re: Problems flashing featurepack

Post by Tommey »

After flashing I got adress file mismatch and when I load my map it won't start.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Problems flashing featurepack

Post by Matt »

Make sure you use the matching feature pack base map S14_SR20DET_82F0F_MT_EDM_FP_maps.bin

If you have a previous tune, you cannot just load it over the top (there are new and different parameters) otherwise it will mess up everything added to feature pack

Use File > Import to convert a previous tune to one for feature pack
Tommey
 

Posts: 31
Joined: Thu Jul 31, 2014 7:30 am

Re: Problems flashing featurepack

Post by Tommey »

I have tried again with no success.
There isnt any EDM FP maps so i tried ADM and JDM.

I need a step by step explanation so i can get this up and running.
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Problems flashing featurepack

Post by Matt »

I see the problem... the 75F0F maps are not in the latest ROM pack

Attached are the files. Unzip them and put them in your Documents\Nistune\ROM_Pack\Type34\S14A_SR20DET folder

1. After this connect to your ECU
2. Load the S14_SR20DET_75F0F_MT_NATS_EDM_FP_maps.bin from this folde
3. File > Import > your previous tune
4. Upload to ECU

It should work from here. I'll fix the ROM pack up now to include this file
Attachments
S14_SR20DET_82F0F_MT_EDM_FP_maps.zip
(65.13 KiB) Downloaded 93 times
Tommey
 

Posts: 31
Joined: Thu Jul 31, 2014 7:30 am

Re: Problems flashing featurepack

Post by Tommey »

This solved my problem, thanks Matt!
Tommey
 

Posts: 31
Joined: Thu Jul 31, 2014 7:30 am

Re: Problems flashing featurepack

Post by Tommey »

This firmware does not support fans? I have to run them manually.
Have to change the firmware for a newer one?
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Problems flashing featurepack

Post by Matt »

Fan control temperature is adjustable in this feature pack version for S14/S14A/S15

Refer to the feature pack software guide for adjusting them
Post Reply