Closed Loop Parameters (Issue)

Discussions concerning the M7790 cpu

Moderator: Matt

Post Reply
UNISA JECS
 

Posts: 367
Joined: Wed Jun 04, 2008 3:48 am
Location: USA Socal

Closed Loop Parameters (Issue)

Post by UNISA JECS »

Hi Matt I have reason to believe these tables are incorrect in there translation but I could be wrong but as is the tables highlighted in BLUE do not make much sense to me I also brought this up on my B14 ECU as well here viewtopic.php?f=11&t=2764 but now I am tuning my B13 and I noticed more of the same, could you please look into this, I also came across a translation of this in nismotronics which makes more sense with reguards to RPM vs KMH

Image
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Closed Loop Parameters (Issue)

Post by Matt »

The RPM/Kmh has been fixed in the code now

Looks like you are trying to compare a Nismotronic bin against a standard Nissan one. They have changed various parameters from the factory ones in the 'base tunes' which means not all parameters will have the same values

Also I do not have the 'closed loop enable' Max RPM or Max MAF load

The ones on the right you are looking at are the 'closed loop transition' parameters which is a different set of parameters
Post Reply