Type 3 Decel Loss, RPM, MAF and Temperature

Discussions concerning the M7790 cpu

Moderator: Matt

Post Reply
UNISA JECS
 

Posts: 367
Joined: Wed Jun 04, 2008 3:48 am
Location: USA Socal

Type 3 Decel Loss, RPM, MAF and Temperature

Post by UNISA JECS »

Hey Matt can you look into these, they seem to look like they make some sense, thanks.

Image
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Type 3 Decel Loss, RPM, MAF and Temperature

Post by Matt »

that is a later model B13 SR20DE ECU. tables may have been moved or different tables used. I'll have to udpate the address file for this one
UNISA JECS
 

Posts: 367
Joined: Wed Jun 04, 2008 3:48 am
Location: USA Socal

Re: Type 3 Decel Loss, RPM, MAF and Temperature

Post by UNISA JECS »

Matt wrote:that is a later model B13 SR20DE ECU. tables may have been moved or different tables used. I'll have to udpate the address file for this one
Its a 92 and works under the 91-92 .ADR
Attachments
nistune1.JPG
(26.01 KiB) Downloaded 1436 times
nistune67y00.JPG
(49.66 KiB) Downloaded 1437 times
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Type 3 Decel Loss, RPM, MAF and Temperature

Post by Matt »

I checked it out properly this morning. I've added different (incorrect) addresses for those parameters.

Not sure why now since the base addresses (used also for SR20DET) were correct. I've commented out those lines (attached)

Put this in your address folder
Attachments
B13_SR20DE_256_E_91-92.adr
(685 Bytes) Downloaded 96 times
Post Reply