AFRs at dump vs exhaust (external)

Results of any interesting tests done with or related to Nistune.

Moderator: Matt

Post Reply
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

AFRs at dump vs exhaust (external)

Post by Matt »

Doing some Innovate LC1 + LM2 daisy chain testing today but with two wideband sensors installed differently

LC-1 is in the dump pipe but LM-2 is in the exhaust. About 0.2 AFR difference (leaner reading at exhaust)

Mostly these stay consistent except for on decel due to air fluctuations in the exhaust. Probably about the second time I've linked the innovate into each other but they seem to work well (apart from one empty selection item in the drop lists)
Attachments
innovate_exhaust_vs_external.JPG
(301.53 KiB) Downloaded 3312 times
bachig24u
 

Posts: 677
Joined: Mon Jun 01, 2009 11:46 pm
Location: Campbelltown, NSW
Contact:

Re: AFRs at dump vs exhaust (external)

Post by bachig24u »

Nice demonstration of transport delay.

Was the tail pipe sniffed with or without a cat?
Matt
Site Admin
 

Posts: 8961
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: AFRs at dump vs exhaust (external)

Post by Matt »

No cat... the one that was in there had melted and ended up being the culprit limiting my boost to about 6psi so was subsequently 'fixed'
Post Reply