Nope
I did have a dodgy O2 sensor. I only just got around to changing it yesterday. It's a little better but still have the lean spot (yes I know it's still warming up in at this temp).
Blue circles are Accel off, Clutch in. my TPS idle is 620 (Q45)
Search found 175 matches
- Fri Sep 25, 2015 12:25 pm
- Forum: Type 2
- Topic: Lean delay after shifting
- Replies: 26
- Views: 31209
- Tue Sep 22, 2015 9:10 pm
- Forum: General Nistune Discussion
- Topic: Counterfeit Continental flex fuel sensors
- Replies: 12
- Views: 12416
Re: Counterfeit Continental flex fuel sensors
Something with AN6 fittings would be perfect
- Thu Aug 27, 2015 9:36 am
- Forum: General Nistune Discussion
- Topic: No RPM when logging
- Replies: 7
- Views: 3109
Re: No RPM when logging
There's a drop-down for estimated AFR/Lambda (possibly only available in advanced mode?).
It's rarely accurate. Just use filtered or raw values.
Using the trace map can tell you what you're actually getting in each cell.
It's rarely accurate. Just use filtered or raw values.
Using the trace map can tell you what you're actually getting in each cell.
- Tue Aug 25, 2015 3:37 pm
- Forum: General Nistune Discussion
- Topic: No RPM when logging
- Replies: 7
- Views: 3109
Re: No RPM when logging
I've had this happen before (only logs the WB data). I'm not sure consult was connected though. It worked fine the next time I use NT, so I didn't think anything of it.
- Sat Aug 22, 2015 7:40 am
- Forum: Software Enhancements
- Topic: onboard logging
- Replies: 3
- Views: 3488
- Sat Aug 22, 2015 12:14 am
- Forum: Type 2
- Topic: Is this a dead (or dying) O2 sensor?
- Replies: 7
- Views: 2254
Re: Is this a dead (or dying) O2 sensor?
It must take a lot if altering to get the AFR's to move then.
I've got it running "ok". I still have that persistent lean delay after shifting.
Might be time to visit a tuner. I have a new turbo, manifold, etc.etc. I'm just trying to buy some more time for other parts
I've got it running "ok". I still have that persistent lean delay after shifting.
Might be time to visit a tuner. I have a new turbo, manifold, etc.etc. I'm just trying to buy some more time for other parts
- Thu Aug 20, 2015 3:24 pm
- Forum: Type 2
- Topic: Is this a dead (or dying) O2 sensor?
- Replies: 7
- Views: 2254
Re: Is this a dead (or dying) O2 sensor?
I was meaning, change TIM by 1%, hit apply. Should it be instant?
- Thu Aug 20, 2015 11:43 am
- Forum: Type 2
- Topic: Is this a dead (or dying) O2 sensor?
- Replies: 7
- Views: 2254
Re: Is this a dead (or dying) O2 sensor?
Based on the other post I figured I'd add 1% to TIM and see how it affect my afr's. Drove to work with not much changing. After work I added another 1% and not much changed. Stopped at the servo (E85 life) and 20min after filling up, crazy rich. My car is never rich. How soon after changing TIM does...
- Thu Aug 20, 2015 11:37 am
- Forum: Mechcnical and Running issues
- Topic: test
- Replies: 1
- Views: 2694
Re: test
All good
- Wed Aug 19, 2015 11:38 pm
- Forum: Type 2
- Topic: Is this a dead (or dying) O2 sensor?
- Replies: 7
- Views: 2254
Re: Is this a dead (or dying) O2 sensor?
When I say dead, it's really flat-lined (the other pictures perhaps don't show the severity)
Short Term Trim hits the roof too.
Short Term Trim hits the roof too.
- Wed Aug 19, 2015 11:33 pm
- Forum: Type 2
- Topic: Is this a dead (or dying) O2 sensor?
- Replies: 7
- Views: 2254
Is this a dead (or dying) O2 sensor?
My car is always pretty lean (on-going saga). Today it was mega rich and it was sustained for a long time. Here it takes a dive and stays down for about 5mins http://minett.com.au/skyline/deadO2.jpg Then it comes to life for a short while only to die for the rest of the journey http://minett.com.au/...
- Wed Aug 19, 2015 11:21 pm
- Forum: Software Enhancements
- Topic: Play head position in log recorder
- Replies: 1
- Views: 2717
Play head position in log recorder
Hi Matt,
Is it possible to have NT remember where you put the play head when the "fit" check box is ticked. That way it would be in the same spot when you untick "fit".
It's annoying having to fastforward to where you want to go in a 30min+ log file.
Thanks
Is it possible to have NT remember where you put the play head when the "fit" check box is ticked. That way it would be in the same spot when you untick "fit".
It's annoying having to fastforward to where you want to go in a 30min+ log file.
Thanks
- Wed Aug 19, 2015 11:18 pm
- Forum: General Nistune Discussion
- Topic: Not allowed to Post or Read posts in Mechanical Issues Forum
- Replies: 1
- Views: 1403
Not allowed to Post or Read posts in Mechanical Issues Forum
Maybe that's the intended result for me?
Matt can you please correct the permissions?
Matt can you please correct the permissions?
- Mon Aug 17, 2015 4:26 pm
- Forum: Type 2
- Topic: Lean delay after shifting
- Replies: 26
- Views: 31209
Re: Lean delay after shifting
anybody have an idea of what I should look at? Or do I take it to a tuner?
- Wed Aug 12, 2015 8:58 pm
- Forum: Type 2
- Topic: Lean delay after shifting
- Replies: 26
- Views: 31209