Search found 24 matches

by Tbstr3
Tue Mar 06, 2018 4:50 am
Forum: Type 1
Topic: Running off knock tables always
Replies: 21
Views: 4849

Re: Running off knock tables always

My base image is 36f05 I don't believe this is a feature pack setup since nistune was imaged and installed like ten years ago. I live in Racine,WI United States, so finding anyone near me that deal in nistune would probably be near impossible. What do you suggest I do here? Sounds to me I should hav...
by Tbstr3
Mon Mar 05, 2018 4:49 am
Forum: Type 1
Topic: Running off knock tables always
Replies: 21
Views: 4849

Running off knock tables always

I've read everything Google has told me and what I could find around here. From the moment I start the car it's running off the knock tables. - I've read could have something to do with neutral switch,which is not lit in the gauge selection,but why would it be it's a manual since it was built from f...
by Tbstr3
Thu Feb 22, 2018 11:51 pm
Forum: Type 1
Topic: Latency + K Values
Replies: 14
Views: 40224

Re: Latency + K Values

Could use some help pinning down the latency and K of the following injectors, I cant get this car to idle very well, im sure ill be posting in other areas and spending the next few weeks on this forum haha. I can change the K till Stoich at times then it wont rev, so I set it richer, which allows t...
by Tbstr3
Thu Feb 15, 2018 12:19 am
Forum: Type 1
Topic: Nistune installed in the wrong ECU? (I think so)
Replies: 7
Views: 2981

Re: Nistune installed in the wrong ECU? (I think so)

Thanks Matt, I am gong to finish Socketing this other computer and between the two ill get something figured out, and will report back.
by Tbstr3
Tue Feb 13, 2018 6:17 am
Forum: Type 1
Topic: Nistune installed in the wrong ECU? (I think so)
Replies: 7
Views: 2981

Re: Nistune installed in the wrong ECU? (I think so)

3 years Later I'm back! I purchased the vehicle from a family member, which has done nothing with it since built 10 years + ago. Here's the Dilemma : - The ECU I had Socketed for him and was working, is now causing the EGI FUEL Relay to Click constantly when ignition is on - So I Removed the Nistune...
by Tbstr3
Wed Sep 09, 2015 1:32 pm
Forum: Type 1
Topic: Ford Lightning MAF 550cc injectors
Replies: 3
Views: 2210

Ford Lightning MAF 550cc injectors

I'd hate to bring something up that I'm sure has been covered, I did do a search :)
But I'm looking for a tuned rom or something close to one that will get us at least drive able

- 550 injectors low independence
- suck through Ford Lightning MAF ( OEM )
by Tbstr3
Mon Aug 24, 2015 4:12 am
Forum: Type 1
Topic: Nistune installed in the wrong ECU? (I think so)
Replies: 7
Views: 2981

Re: Nistune installed in the wrong ECU? (I think so)

Thanks Matt, I ended up installing nistune into another ECU and it solved the issues we were having.
by Tbstr3
Tue Aug 11, 2015 11:06 pm
Forum: Type 1
Topic: Nistune installed in the wrong ECU? (I think so)
Replies: 7
Views: 2981

Re: Nistune installed in the wrong ECU? (I think so)

Replaced entire engine harness with brand new one (CA18DET), and coolant temp sensor. In the software the coolant temp Jumps up and down from 60 degrees to 199 degrees Constant also all down the left side menu of the software multiple selections highlight green on/off with the jump of the coolant te...
by Tbstr3
Tue Aug 11, 2015 12:59 pm
Forum: Type 1
Topic: Nistune installed in the wrong ECU? (I think so)
Replies: 7
Views: 2981

Nistune installed in the wrong ECU? (I think so)

Ok guys I need some insight here. - Nistune - says 36F05 - ECU - 2371M 36F15 - Constant DTC 13 Coolant Temp (all wires traced temp sensor changed) Vehicle is 89 240sx with a built Ca18DET Ford Lightning Maf - Additional ECU's owned (not Chipped) - Should I put the nistune in one of the following? - ...