Search found 8844 matches
- Mon Oct 16, 2023 10:23 am
- Forum: Type 2
- Topic: AFTER_START_TIMING_ADVANCE is temp based
- Replies: 1
- Views: 72720
Re: AFTER_START_TIMING_ADVANCE is temp based
See what you mean: HCR32 (base file) TIMING_ADVANCE,&H7EC0,16,1,16,1 (Temperature) AFTER_START_TIMING_ADVANCE,&H7BE0,16,1,16,1 (RPM) AFTER_START_TIMING_RETARD,&H7540,16,1,16,1 BA74 : B6 14 5D " ]" ldaa 145D_RAM_TEMP_IDX BA77 : CE FE C0 " " ldx #ROM_FEC0_ROM_TIMING_ADV...
- Mon Oct 16, 2023 10:13 am
- Forum: Others
- Topic: MPX4250 pressure sensor alternatives
- Replies: 4
- Views: 78859
Re: MPX4250 pressure sensor alternatives
That looks promising and a better price. As long as you can get the MAP > volts conversion for it then you should be set
- Mon Oct 16, 2023 10:12 am
- Forum: Type 3/4/5
- Topic: nistune temp warning over 95 C
- Replies: 3
- Views: 19558
Re: nistune temp warning over 95 C
It depends on the ECU. For later ones like S13 SR20DET onwards it adds some extra enrichment over this temperature (plus fan control etc) but earlier ones don't seem to have any tables which use this setting The warning in the software is hard coded to when coolant temp > 95 degC to warn the operator
- Mon Oct 09, 2023 8:20 pm
- Forum: General Nistune Discussion
- Topic: Nistune 1.4
- Replies: 6
- Views: 31295
Re: Nistune 1.4
Version 1.4.3
Fix Q45 Type 3 address lookup
- Thu Oct 05, 2023 8:13 pm
- Forum: Others
- Topic: MPX4250 pressure sensor alternatives
- Replies: 4
- Views: 78859
Re: MPX4250 pressure sensor alternatives
Might have to try other places after google searching
https://www.diyautotune.com/product/mpx ... ap-sensor/
https://www.diyautotune.com/product/mpx ... ap-sensor/
- Thu Oct 05, 2023 8:08 pm
- Forum: Type 3/4/5
- Topic: Injector resizing reset ?
- Replies: 8
- Views: 137471
Re: Injector resizing reset ?
Apologies for the delay Best bet is to reload the factory file if you haven't done that already Otherwise the factory K = 348 and TIM = 512 and you can then do the resize again Each time you resize, it will adjust K and TIM values. It will also adjust crank enrich each time, if the checkbox to adjus...
- Thu Oct 05, 2023 8:04 pm
- Forum: Type 3/4/5
- Topic: nistune temp warning over 95 C
- Replies: 3
- Views: 19558
Re: nistune temp warning over 95 C
It's not lying. The temperature kept on creeping up in the log. Temp curve looks okay
- Thu Oct 05, 2023 7:58 pm
- Forum: Type 2
- Topic: Throttle enrichment and Wall Flow tables
- Replies: 4
- Views: 15618
Re: Throttle enrichment and Wall Flow tables
Sorry for the delay on my response also, have been away on vacation and playing catchup. I didn't really see anything apart from idling in that log file. With the overshoot, you can use TTPmax to adjust for TP overshoot as a result of MAF voltage if required With the adjustments to the wall flow tab...
- Thu Oct 05, 2023 7:52 pm
- Forum: Type 2
- Topic: Throttle enrichment and Wall Flow tables
- Replies: 4
- Views: 15618
Re: Throttle enrichment and Wall Flow tables
http://nistune.com/docs/Nistune_Mapping_Guide.pdf Refer to page 34 of this for the tables. They are all multiplied together Wall flow accel temp factor This appears to be a pulsewidth that everything else is based on. It obviously varies with temp. Correct. It is the base table used for calculation...
- Thu Oct 05, 2023 7:44 pm
- Forum: General Nistune Discussion
- Topic: Forum images gone?
- Replies: 5
- Views: 86895
Re: Forum images gone?
I had to contact the old web provider for a copy of the backup. Got that today in one big archive file, so will have a go at the remainder in the next few days
- Thu Oct 05, 2023 7:43 pm
- Forum: General Nistune Discussion
- Topic: Nistune on Youtube and Facebook
- Replies: 23
- Views: 39548
Re: Nistune on Youtube and Facebook
You can increase the TTP max value above 136 in this case. It just limits injection, so normally the resize injector tool will set the top values to 255 To reduce load, you can lower K constant. This will also in turn reduce fueling. So if you have the Total Injection Multiplier parameter available ...
- Thu Sep 14, 2023 12:01 pm
- Forum: General Nistune Discussion
- Topic: Forum images gone?
- Replies: 5
- Views: 86895
Re: Forum images gone?
Attachments were not copied across. I've done that now, so those are working for non image files. Image files are still an issue so looking into that further
- Thu Sep 14, 2023 10:57 am
- Forum: Type 3/4/5
- Topic: S14 SR20DE Coil on plug solution
- Replies: 0
- Views: 156801
S14 SR20DE Coil on plug solution
S14 SR20DE Coil on plug using SR20DET ECU information attached From customer Bram: I've managed to get my car running on the type 4 board and a JDM det ecu, I've attached how so maybe it can help someone else if they ask you. No need to swap out the loom, just the trigger and home signals are revers...
- Thu Sep 14, 2023 10:55 am
- Forum: Type 3/4/5
- Topic: MAF issue 5v @ ignition
- Replies: 2
- Views: 7401
Re: MAF issue 5v @ ignition
Check the voltage reported on the MAF channel in the software. See what that says. It should match the shielded signal wire against the ground wire at the MAF sensor
- Thu Sep 14, 2023 10:07 am
- Forum: General Nistune Discussion
- Topic: Forum images gone?
- Replies: 5
- Views: 86895
Re: Forum images gone?
I've noticed this and will have to go through the forum upgrades and movement to the new server and fix this up