Nistune Forums

OK, just been in the car and did an upload with switched even/odd emulators (so wrong way) - ECU didn´t connect to consult (just wanted to make sure NIStune overwrites the already uploaded roms). Then connected in the correct order and uploaded - Consult worked ;) Started the car and altered AFR at...

Verified in car and works - thanks
But please change the look, since AEM doesn´t support additional inputs so just AFR would do in the wideband box...

Is it possible to use the GRID board with two identical emulators - so that I use two Ostrich in 64k configuration - with your software as emulator 1 and 2?
Or doesn´t allow the board it for ER34 ECU?

Also with your Moates which isn't retaining data... they have a small battery inside them. It may be flat... when you disconnect the unit there is no power for the RAM chip and it loses contents Sounds like time for another battery I replaced them since they just had 3.6volts altogether (should hav...

So some difference with offsets between Romulator I (32K emulator) and Moates (64K emulator). Looking into it further again tomorrow night and hopefully have a fix for you then. Perhaps the moates is putting the ROM different to where I am expecting it to go? Must have something to do with this, bu...

...matt provide shit hot boards for loads of cars, why complicate things with emulators and such... I paid my board in advance to Matt some months ago and even provided him with an ER34 ECU for testing, but since I´m running out of time I just had to get a solution here and found the GRID boards u...

I wonder why there´s no problem with the normal emulation then, where you just use one emulator (R32 GTR, GTST...)

What chips does the Grid board use and from what memory location does it need to read from? You should do a memory dump from the working emulators to see what's on them. Oh and I should add do the same for the ones that dont work to compare them with. What for should I do an memory dump? GRID board...

I´m starting to get pissed... As already stated in the AEM thread, I just got my Moates 2.0 emulators and tried them out with the GRID board in even/odd just like you described - didn´t start. So before messing around with NIStune again, instead I just loaded the even and odd file into the emulato...

When do you release 0.9110?
Just got my two Ostrich 2.0 yesterday and would like to start playing around with the car today

Matt wrote: It is fixed and all tested and confirmed working with my AFR output simulator. Will be available in the next version

When´s it coming out?

Played around with Nistune in my girlfriends R34 GTT a bit, if I first load the Emulators in 256kb even/off configuration using ROMTool, I can use them in Nistune and upload/download maps, alter in realtime etc. But when setting rev limiter for example it shows that changes are not really committed....

Took some time, but finally tried to use it - doesn´t work.
Seems to connect at Port 1, but then there´s a message like "Wideband not configured" and it just reads 9 permanently...
If I open Com1 with Windows Hyper Terminal, I get correct reading submitted all the time though...

Hi,

just tried to use my emulator with nisutne, every time I try to connect by pressing the "emulator" I´m told that the Romulator can´t be found - no matter which emulator I choose in the options.
Anyone else tried to used emulators beneath Romulator yet?

Cheers,
Andy

Hi,

will support for these gauges be added?
They´re quite cheap and I´ve got one, that´s why I´m asking
Link:
http://www.aempower.com/ViewCategory.aspx?CategoryID=67

Cheers,
Andy